» Service / Medical Specializations
Medical Specializations:
Anesthesia
Bone Surgery, Traumatology
Cardiovascular Instrumente
Conservative Treatment
Cutting
Dermatology, Hygiene
Diagnostica, Paradontology, Conservation of Teeth, Endontic Instruments
Diagnostics
Extracting Forceps
Extraction
Gall Bladder
Goitre
Gynecology
Hemostatic Forceps
Implants for Osteosynthesis
Instruments and Implants Sets
Intestines, Stomach
Kidney
Larynx
Mouth and Tongue
Neurosurgery, Laminectomy
Obstetrics
Ophthalmology
Otology
Plaster-of-Paris
Polypus, Dressing Forceps
Probes, Cotton Applicators
Prosthetics, Orthodontics
Rectum
Retractors and Spreaders
RF-Surgery
Rhinology
Scissors
Sterilizing Aids
Storage, Sterilization
Suture
Thorax
Thumb and Tissue Forceps
Tonsils
Towel Clamps
Tracheostomy
Trocars, Puncture Needles
Tubing Clamps
Urology
Medical Specialization:

Bone Surgery
Traumatology

Catalog page: 32

 32-1001-12 FRIEDMAN mini rongeur 12 cm
 32-1001-14 FRIEDMAN rongeur 14 cm
 32-1002-14 FRIEDMAN rongeur delicate 14cm 90° angled
 32-1002-15 FRIEDMAN rongeur delicate 15cm
 32-1000-14 FRIEDMANN VICKERS rongeur sl.cvd.14cm


 32-1003-14 CLEVELAND rongeur 14 cm
 32-1005-17 CLEVELAND rongeur 17 cm
 32-1011-14 GLASGOW rongeur 14,5 cm
 32-1007-16 MEAD rongeur rounded 16 cm
 32-1009-16 MEAD rongeur square tip 16 cm


 32-1109-15 BLUMENTHAL rongeur angulated
 32-1105-15 BLUMENTHAL rongeur sl.cvd.15cm
 32-1107-15 BLUMENTHAL rongeur st.cvd.15cm
 32-1013-14 COHEN rongeur 14 cm


 32-1305-15 LUER bone rongeur 15 cm narrow
 32-1301-15 LUER rongeur 15 cm
 32-1303-15 LUER rongeur 15 cm narrow
 32-1307-17 LUER rongeur 17 cm curved
 32-1306-17 LUER rongeur 17 cm straight


 32-1403-20 ADSON rongeur 20 cm curved
 32-1402-20 ADSON rongeur 20 cm straight
 32-1315-18 BANE rongeur 18 cm 4 mm bite
 32-1383-21 CLOVIS VINCENT rongeur 21 cm curved long jaw
 32-1381-21 CLOVIS VINCENT rongeur 21 cm curved short jaw
 32-1383-26 CLOVIS VINCENT rongeur 26 cm curved long jaw
 32-1381-26 CLOVIS VINCENT rongeur 26 cm curved short jaw


 32-1507-17 HAKANSSON bone rongeur lateral
 32-1499-20 LEMPERT JUERS rongeur 20 cm 3 mm
 32-1501-16 LEMPERT rongeur 16cm curved
 32-1500-16 LEMPERT rongeur 16cm straight
 32-1505-18 LEMPERT rongeur 18,5 cm curved
 32-1504-18 LEMPERT rongeur 18,5 cm straight
 32-1407-20 OLIVECRONA rongeur 20 cm


 32-1605-20 BACON bone rongeur cvd.later.
 32-1601-02 BEYER bone rongeur 17 cm 2 mm
 32-1601-03 BEYER bone rongeur 17 cm 3 mm
 32-1509-18 BEYER bone rongeur box-lock
 32-1609-20 GULEKE bone rongeur 20,5 cm
 32-1607-19 JANSEN bone rongeur box-lock


 32-1619-19 DEFOURMENTEL rongeur 19 cm cm straight 3 mm
 32-1612-24 SICARD rongeur 24 cm
 32-1611-22 ST. GEORG rongeur 22 cm
 32-1615-17 STELLBRINK bone rongeur delic. slightly curved
 32-1617-17 STELLBRINK bone rongeur delicate strongly curved


 32-1635-13 bone rongeur universal
 32-1631-18 HARTMANN bone rongeur 18,5 cm
 32-1621-18 JANSEN bone rongeur sl.curved
 32-1623-18 JANSEN bone rongeur st.curved
 32-1620-18 JANSEN bone rongeur straight
 32-1638-20 PENNYBACKER rongeur 20 cm str.


 32-2001-18 BEYER rongeur 18 cm
 32-1641-20 FALCONER rongeur 20 cm
 32-1689-15 KLEINERT KUTZ rongeur sl.cvd.15 cm
 32-1647-20 NORTHFIELD bone rongeur
 32-1643-20 TROTTER rongeur 20 cm
 32-1645-20 WILMS bone rongeur angled jaw


 32-2100-15   32-2101-15 BOEHLER rongeur 15 cm 2 mm (RUSKIN mini)
 32-2102-15   32-2103-15 BOEHLER rongeur 15 cm 3 mm (RUSKIN mini)
 32-2003-15 GEIGER rongeur sl.cvd.1 5 cm 3 mm
 32-2111-18 RUSKIN bone rongeur cvd.later.
 32-2107-18 RUSKIN rongeur 18 cm curved
 32-2106-18 RUSKIN rongeur 18 cm straight
 32-2109-23 RUSKIN rongeur 23 cm
 32-2108-23 RUSKIN rongeur 23 cm straight
 32-2005-18 ZAUFAL JANSEN rongeur 18 cm


 32-2123-24 FULTON bone rongeur 15x16 mm curved 24 cm
 32-2121-24 ROETTGEN RUSKIN rongeur 24 curved
 32-2301-22 STILLE LUER rongeur 22cm cvd.
 32-2300-22 STILLE LUER rongeur 22cm strgt
 32-2305-23 STILLE LUER rongeur 23 cm
 32-2303-23 STILLE LUER rongeur 23 cm cvd.
 32-2302-23 STILLE LUER rongeur 23 cm str.
 32-2301-26 STILLE LUER rongeur 26cm curved
 32-2300-26 STILLE LUER rongeur 26cm strgt
 32-2302-27   32-2303-27 STILLE LUER rongeur 27 cm cvd.


 32-2407-23 LEKSELL (STILLE) rongeur 5 mm
 32-2405-23 LEKSELL (STILLE) rongeur 8 mm
 32-2409-05 LEKSELL rongeur strg.cve. 5 mm
 32-2409-08 LEKSELL rongeur strg.cve. 8 mm
 32-2403-30 SAUERBRUCH bone rongeur round
 32-2401-30 SAUERBRUCH bone rongeur square
 32-2307-23 STILLE RUSKIN bone rongeur


 32-2509-02 ECHLIN bone rongeur 2 mm
 32-2509-03 ECHLIN bone rongeur 3 mm
 32-2509-04 ECHLIN bone rongeur 4 mm
 32-2505-24 FRYKHOLM bone rongeur 24 cm
 32-2503-26 SCAGLIETTI rongeur left side
 32-2501-26 SCAGLIETTI rongeur right side
 32-2601-22 SEMB bone rongeur 22,5 cm
 32-2601-27 SEMB bone rongeur 27,0 cm


 32-2611-20 MARQUARDT bone rongeur 20 cm
 32-2613-17 MAYFIELD bone rongeur 17 cm
 32-2603-24 SMITH PETERSEN rongeur 3 mm slightly curved
 32-2602-24 SMITH PETERSEN rongeur 3 mm straight
 32-2605-24 SMITH PETERSEN rongeur 3 mm strongly curved


 32-2625-03 DALE bone rongeur 35 cm 3,0 mm
 32-2625-08 DALE bone rongeur 35 cm 8,0 mm
 32-2623-03 SYPERT bone rongeur 35 cm 3,0 mm
 32-2623-05 SYPERT bone rongeur 35 cm 5,0 mm
 32-2623-08 SYPERT bone rongeur 35 cm 8,0 mm


 32-2703-12 bone cutting forceps 12 cm
 32-2723-15 CLEVELAND bone cutt.fceps n.5S
 32-2721-17 CLEVELAND bone cutt.fceps no.5
 32-2704-14   32-2704-17   32-2704-19   32-2704-22   32-2705-14   32-2705-17   32-2705-19   32-2705-22 LISTON bone cutting forceps
 32-2710-20 MARKWALDER rongeur concav.bite
 32-2701-15 STAMM bone cutting forceps 15 cm


 32-2804-15   32-2805-15 BOEHLER bone cutting forceps (WALTON LISTON)
 32-2790-16 bone cutting forceps 16 cm
 32-2725-16 CLEVELAND bone cutt.fceps n.6A
 32-2727-16 CLEVELAND bone cutt.fceps no.6
 32-2782-19 COTTLE KAZANJIAN bone cutt.fcp
 32-2802-15 KLEINERT KUTZ bone cutting fcps.str.15cm
 32-2803-15 KLEINERT KUTZ bone cutting forceps
 32-2807-17 MC INDOE bone cutting forceps 17,5 cm angled
 32-2808-18   32-2809-18 RUSKIN LISTON bone cutt.fcps.


 32-2833-17 bone cutting forceps fine 17 cm
 32-2901-23 LISTON bone cutt.forcps 23,5 cm
 32-2820-18   32-2821-18 RUSKIN ROWLAND bone cutt.fcps. 18 cm
 32-2905-24 SEMB bone cutting forceps
 32-2903-27 STILLE HORSLEY bone cutt.fcps.
 32-2900-27   32-2901-27 STILLE LISTON bone cutt.fcps.
 32-2917-27 STILLE LISTON bone cutt.forcps 27 cm


 32-3606-23   32-3606-26 FARABEUF bone holding forcep
 32-3608-26 FARABEUF LAMBOTTE bone hold fc
 32-3600-21 FERGUSSON bone holding forceps
 32-3700-22   32-3700-27   32-3700-30 LAMBOTTE bone holding forceps
 32-3602-21 LANGENBECK bone holding forceps
 32-3605-19 SEMB bone holding forcep without ratchet
 32-3603-19 SEMB bone holding forceps with ratchet


 32-3704-23 BISHOP bone holding forceps 23 cm
 32-3806-20 bone holding forceps 20 cm
 32-3800-15   32-3800-17   32-3800-21 KERN bone holding forc.w.ratch
 32-3708-15   32-3708-17   32-3708-21 KERN bone holding forceps
 32-3802-24 KERN LANE bone holding forceps 24 cm
 32-3702-22   32-3702-26   32-3702-33   32-3703-19   32-3703-23   32-3703-26 LAMBOTTE bone holding forceps
 32-3804-33   32-3804-45 LANE bone holding forc.w.ratch
 32-3802-33   32-3802-45 LANE bone holding forceps


 32-3810-18 FROSCH bone holding forceps 18 cm
 32-3820-20 HEY GROVES bone hold fcps.20cm
 32-3820-25 HEY GROVES bone hold fcps.25cm
 32-3820-30 HEY GROVES bone hold fcps.30cm
 32-3812-23   32-3812-25   32-3812-28 ULRICH bone holding forceps
 32-3813-28 ULRICH bone holding forceps cv
 32-3813-23   32-3813-25 ULRICH bone holding forceps cvd.


 32-3901-15   32-3901-19   32-3901-24   32-3901-26   32-3901-28 bone hold.forceps self center.
 32-3905-17   32-3905-25   32-3905-26   32-3905-27 VERBRUGGE bone hold.forceps
 32-3991-20 WELLER grasping forceps heavy 20 cm


 32-4001-20 BIRCHER bone holding forc.cvd. 20 cm
 32-4000-20 BIRCHER bone holding forc.str. 20 cm
 32-4004-20   32-4005-20 BIRCHER GANSKE bone hold.forc.
 32-4006-20 BIRCHER GANSKE meniscus grasping forceps curved to side 20 cm
 32-4007-19 DINGMANN bone holding forceps
 32-4008-19 DINGMANN bone holding forceps modified
 32-4002-17 LEWIN bone hold.forceps


 32-4009-13 bone holding forceps 13,5 cm
 32-4013-16 HAASE reposition forceps 16,5 cm
 32-4014-16 reduction forceps 16 cm
 32-4011-13 reposition forceps 13,5 cm
 32-4009-09 reposition forceps 9,5 cm (Termite)


 32-4021-14 bone holding forceps 13,5 cm
 32-4016-16 forceps phalangeal 16 cm
 32-4025-18 McLEARY bone and plate holding forceps with swivel upper jaw for ulna and radius 18,5 cm
 32-4030-16 reduction forceps 16 cm
 32-4030-22 reduction forceps 22 cm
 32-4030-24 reduction forceps 24 cm
 32-4023-12 reposition forceps small 12 cm
 32-4015-19 TUCKER hallux holding forceps 19 cm


 32-4102-18 BURNS bone holding forceps 18,5 cm for ulna and radius
 32-4034-14 forceps phalangeal
 32-4051-23 HERZ meniscus hold.forceps 23 cm atraumatic
 32-4053-23 JÄGER meniscus hold.forceps 23,5 cm
 32-4100-16 MARTIN cartil.hold.forceps16cm
 32-4100-19 MARTIN cartil.hold.forceps19cm
 32-4101-17 REILL reduction forceps 17 cm
 32-4057-20 WELLER grasping forceps heavy 20 cm


 33-8121-13 canal brush for screws 1,35 mm
 33-8115-17 canal brush for screws 1,75 mm
 33-8111-21 canal brush for screws 2,1 mm
 33-8121-12 canal cleaner for screws 1,2 mm
 33-8116-16 canal cleaner for screws 1,6 mm
 33-8112-20 canal cleaner for screws 2,0 mm
 33-8120-35 direct screws length gauge for 3,5 mm not calibrated
 33-8114-45 direct screws length gauge for 4,5 mm not calibrated
 33-8110-70 direct screws length gauge for 7,0 mm not calibrated
 32-4103-20 reduction forceps w.tips 20 cm
 32-4104-17 REILL reduction forceps 17 cm
 33-8107-25 scew holder only for screw driver 33-8106-25
 33-8107-35 scew holder only for screw driver 33-8106-35
 33-8106-25 screw driver f.cann.scr.2,5 mm
 33-8106-35 screw driver f.cann.scr.3,5 mm
 33-8106-50 screw driver f.cann.scr.5,0 mm
 32-4201-20 sequester forceps 20cm curved
 32-4200-20 sequester forceps 20cm strght.
 33-8102-35 tap for 3,5 mm cannulated screws AO 160 mm
 33-8102-40 tap for 4,0 mm cannulated screws AO 160 mm
 33-8102-45 tap for 4,5 mm cannulated screws AO 160 mm
 33-8102-70 tap for cannul.screws 7,0 mm d
 33-8104-00 tap handle for AO/ASIF shaft cannulated
 32-4203-23 VAN BUREN sequester forceps 23 cm


 32-4252-19 OLLIER bone holding forc.w.ratch 19 cm
 32-4252-23 OLLIER bone holding forc.w.ratch 23 cm
 32-4252-27 OLLIER bone holding forc.w.ratch 27 cm
 32-4250-16 OLLIER bone holding forceps 16 cm
 32-4250-18 OLLIER bone holding forceps 18 cm
 32-4250-23 OLLIER bone holding forceps 23 cm
 32-4261-19 pelvic reduction forceps angulated 19 cm with short pointed ball-tips
 32-4261-24 pelvic reduction forceps angulated 24 cm with long pointed ball-tips
 32-4260-24 pelvic reduction forceps straight 24 cm with short pointed ball-tips


 32-4311-20 CODIVILLA clavicula forceps curved
 32-4310-20 CODIVILLA clavicula forceps straight
 32-4321-17 MEYER reduction forceps for fingers with drill guide for wire drills up to 1 mm
 32-4321-20 MEYER reduction forceps with drill guide for wire drills up to 2 mm
 32-4302-18 patella holding forceps 18,5cm
 32-4266-34 pelvic reduction forceps 38 cm
 32-4264-40 pelvic reduction forceps straight 40 cm with long pointed ball-tips 1x2 teeth


 32-4502-00 fixation hand stainless steel for adults
 32-4404-15 GERSTER traction bar
 32-4500-01 lead hand splint adult size
 32-4500-02 lead hand splint child size
 32-4401-18 LOWMAN bone hold.clamp 18,5 cm
 32-4401-20 LOWMAN bone hold.clamp 20 cm
 32-4401-13 LOWMAN bone holding clamp 13cm
 32-4401-22 LOWMAN bone holding clamp 22cm
 32-4402-18 LOWMAN HOGLUND bo.hold.cl.18cm
 32-4408-18 PARHAM band only 18 cm
 32-4408-30 PARHAM band only 30 cm
 32-4406-24 PARHAM band tightener


 32-4514-15 BRAND tendon passer 15 cm
 32-4514-19 BRAND tendon passer 19 cm
 32-4514-24 BRAND tendon passer 24 cm
 32-4510-15 LARSEN tendon seizing fcps.10cm 1,5mm
 32-4510-25 LARSEN tendon seizing fcps.10cm 2,5mm
 32-4510-45 LARSEN tendon seizing fcps.10cm 4,5mm
 32-4510-55 LARSEN tendon seizing fcps.10cm 5,5mm
 32-4512-16 STEINMANN tendon seizing forceps


 32-4521-11 CAROL tendon seiz.forceps 11cm
 32-4528-15   32-4529-15 tendon braiding forceps 15 cm
 32-4517-20 tendon passer curved
 32-4516-20 tendon passer straight
 32-4524-13 tendon seizing forceps w.screw


 32-4602-02   32-4603-02 bone curette Swed.patt. 2 mm
 32-4602-04   32-4603-04 bone curette Swed.patt. 4 mm
 32-4602-06   32-4603-06 bone curette Swed.patt. 6 mm
 32-4602-08   32-4603-08 bone curette Swed.patt. 8 mm
 32-4602-10   32-4603-10 bone curette Swed.patt. 10 mm
 32-4602-12   32-4603-12 bone curette Swed.patt. 12 mm
 32-4602-14   32-4603-14 bone curette Swed.patt. 14 mm
 32-4543-15 HERZ tendon seizing forceps 15,5 cm coarse serration
 32-4541-15 HERZ tendon seizing forceps 15,5 cm fine serrations
 32-4552-20 KLEINERT KUTZ tendon seiz.forceps


 32-4702-00 BRUNS bone curette fig. 0
 32-4701-98 BRUNS bone curette fig. 00
 32-4701-97 BRUNS bone curette fig. 000
 32-4701-96 BRUNS bone curette fig. 0000
 32-4702-01 BRUNS bone curette fig. 1
 32-4702-02 BRUNS bone curette fig. 2
 32-4702-03 BRUNS bone curette fig. 3
 32-4702-04 BRUNS bone curette fig. 4
 32-4702-05 BRUNS bone curette fig. 5
 32-4702-06 BRUNS bone curette fig. 6
 32-4608-00 SCHEDE bone curette fig. 0
 32-4607-98 SCHEDE bone curette fig. 00
 32-4608-01 SCHEDE bone curette fig. 1
 32-4608-02 SCHEDE bone curette fig. 2
 32-4608-03 SCHEDE bone curette fig. 3
 32-4608-04 SCHEDE bone curette fig. 4
 32-4607-97 SCHEDE bone curette fig. 000
 32-4705-00 SPRATT bone curette fig. 0
 32-4704-98 SPRATT bone curette fig. 00
 32-4704-97 SPRATT bone curette fig. 000
 32-4704-96 SPRATT bone curette fig. 0000
 32-4705-01 SPRATT bone curette fig. 1
 32-4705-02 SPRATT bone curette fig. 2
 32-4705-03 SPRATT bone curette fig. 3
 32-4705-04 SPRATT bone curette fig. 4
 32-4705-05 SPRATT bone curette fig. 5
 32-4700-06 VOLKMANN bone cur. fig. 6
 32-4700-00 VOLKMANN bone curette fig.0
 32-4609-98 VOLKMANN bone curette fig.00
 32-4609-97 VOLKMANN bone curette fig.000
 32-4609-96 VOLKMANN bone curette fig.0000
 32-4700-01 VOLKMANN bone curette fig.1
 32-4700-02 VOLKMANN bone curette fig.2
 32-4700-03 VOLKMANN bone curette fig.3
 32-4700-04 VOLKMANN bone curette fig.4
 32-4700-05 VOLKMANN bone curette fig.5


 32-4801-00 BRUNS bone curette 23cm fig. 0
 32-4800-98 BRUNS bone curette 23cm fig. 00
 32-4800-97 BRUNS bone curette 23cm fig. 000
 32-4801-01 BRUNS bone curette 23cm fig. 1
 32-4801-02 BRUNS bone curette 23cm fig. 2
 32-4801-03 BRUNS bone curette 23cm fig. 3
 32-4801-04 BRUNS bone curette 23cm fig. 4
 32-4801-05 BRUNS bone curette 23cm fig. 5
 32-4801-06 BRUNS bone curette 23cm fig. 6
 32-4720-00 DAUBENSPECK bone curette fg. 0
 32-4719-98 DAUBENSPECK bone curette fg. 00
 32-4719-97 DAUBENSPECK bone curette fg. 000
 32-4719-96 DAUBENSPECK bone curette fg.0000
 32-4731-02 KERPEL bone curette left hand 2,0 mm
 32-4731-03 KERPEL bone curette left hand 3,0 mm
 32-4733-02 KERPEL bone curette right hand 2,0 mm
 32-4733-03 KERPEL bone curette right hand 3,0 mm
 32-4732-02 KERPEL bone curette straight 2,0 mm
 32-4732-03 KERPEL bone curette straight 3,0 mm
 32-4805-06 SIMON bone curette 24 cm fig. 6
 32-4805-01 SIMON bone curette 24 cm fig. 1
 32-4805-02 SIMON bone curette 24 cm fig. 2
 32-4805-03 SIMON bone curette 24 cm fig. 3
 32-4805-04 SIMON bone curette 24 cm fig. 4
 32-4805-05 SIMON bone curette 24 cm fig. 5
 32-4723-17   32-4725-17 UFFENORDE bone curette 17 cm


 32-4819-00 BRUNS bone curette oval 23 cm fig. 0 curved
 32-4817-00 BRUNS bone curette oval 23 cm fig. 0 straight
 32-4818-98 BRUNS bone curette oval 23 cm fig. 00 curved
 32-4816-98 BRUNS bone curette oval 23 cm fig. 00 straight
 32-4818-97 BRUNS bone curette oval 23 cm fig. 000 curved
 32-4816-97 BRUNS bone curette oval 23 cm fig. 000 straight
 32-4818-96 BRUNS bone curette oval 23 cm fig. 0000 curved
 32-4816-96 BRUNS bone curette oval 23 cm fig. 0000 straight
 32-4819-01 BRUNS bone curette oval 23 cm fig. 1 curved
 32-4817-01 BRUNS bone curette oval 23 cm fig. 1 straight
 32-4819-02 BRUNS bone curette oval 23 cm fig. 2 curved
 32-4817-02 BRUNS bone curette oval 23 cm fig. 2 straight
 32-4819-03 BRUNS bone curette oval 23 cm fig. 3 curved
 32-4817-03 BRUNS bone curette oval 23 cm fig. 3 straight
 32-4819-04 BRUNS bone curette oval 23 cm fig. 4 curved
 32-4817-04 BRUNS bone curette oval 23 cm fig. 4 straight
 32-4819-05 BRUNS bone curette oval 23 cm fig. 5 curved
 32-4817-05 BRUNS bone curette oval 23 cm fig. 5 straight
 32-4819-06 BRUNS bone curette oval 23 cm fig. 6 curved
 32-4817-06 BRUNS bone curette oval 23 cm fig. 6 straight
 32-4823-96 VOLKMANN curette plastic handle fg.0000
 32-4826-04 VOLKMANN curette plastic handle fig. 4
 32-4824-00   32-4826-00 VOLKMANN curette plastic handle fig. 0
 32-4823-98 VOLKMANN curette plastic handle fig. 00
 32-4824-01   32-4826-01 VOLKMANN curette plastic handle fig. 1
 32-4824-02   32-4826-02 VOLKMANN curette plastic handle fig. 2
 32-4824-03   32-4826-03 VOLKMANN curette plastic handle fig. 3
 32-4824-04 VOLKMANN curette plastic handle fig. 4
 32-4824-05 VOLKMANN curette plastic handle fig. 5
 32-4824-06 VOLKMANN curette plastic handle fig. 6
 32-4823-97 VOLKMANN curette plastic handle fig.000


 32-4829-52 CASPAR curette plastic handle Fig. 0 5,2 mm curved 22 cm
 32-4828-52 CASPAR curette plastic handle Fig. 0 5,2 mm straight 22 cm
 32-4829-44 CASPAR curette plastic handle Fig. 00 4,4 mm curved 22 cm
 32-4828-44 CASPAR curette plastic handle Fig. 00 4,4 mm straight 22 cm
 32-4829-36 CASPAR curette plastic handle Fig. 000 3,6 mm curved 22 cm
 32-4828-36 CASPAR curette plastic handle Fig. 000 3,6 mm straight 22 cm
 32-4833-23 SEMMES spinal fusion curette curved 4 x 7 mm 23 cm
 32-4831-23 SEMMES spinal fusion curette sl. curved 4 x 7 mm 23 cm
 32-4830-23 SEMMES spinal fusion curette straight 4 x 7 mm 23 cm


 32-4852-04 CASPAR curette toothed 4 mm 25 cm
 32-4852-05 CASPAR curette toothed 5 mm 25 cm
 32-4849-00 EPSTEIN bone curette fig. 0 20 cm
 32-4848-98 EPSTEIN bone curette fig. 00 20 cm
 32-4848-97 EPSTEIN bone curette fig.000 20 cm
 32-4901-01 HALLE curette malleable fig. 1
 32-4901-02 HALLE curette malleable fig. 2
 32-4901-03 HALLE curette malleable fig. 3
 32-4900-10 LEMPERT curette 17,5cm fg.0
 32-4900-20 LEMPERT curette 17,5cm fg.00
 32-4900-30 LEMPERT curette 17,5cm fg.000
 32-4900-40 LEMPERT curette 17,5cm fg.0000
 32-4900-50 LEMPERT curette 17,5cm fig. 00000 2,8 x 2,0 mm
 32-4836-25 SCOVILLE ruptured disc curette fig. 1 staight
 32-4837-25 SCOVILLE ruptured disc curette fig. 2 curved forward
 32-4839-25 SCOVILLE ruptured disc curette fig. 3 curved backward


 32-5003-00 COBB spinal fusion curette Fig. 0
 32-5002-00 COBB spinal fusion curette Fig. 00
 32-5001-00 COBB spinal fusion curette Fig. 000
 32-5003-01 COBB spinal fusion curette Fig. 1
 32-5003-02 COBB spinal fusion curette Fig. 2
 32-5003-03 COBB spinal fusion curette Fig. 3
 32-5003-04 COBB spinal fusion curette Fig. 4
 32-5003-05 COBB spinal fusion curette Fig. 5
 32-5003-06 COBB spinal fusion curette Fig. 6
 32-5006-00 HATFIELD spinal fusion curette fig. 0 sharp straight length 23 cm
 32-5008-00 HATFIELD spinal fusion curette fig. 0 sharp straight length 28 cm
 32-5005-98 HATFIELD spinal fusion curette fig. 00 sharp straight length 23 cm
 32-5007-98 HATFIELD spinal fusion curette fig. 00 sharp straight length 28 cm
 32-5005-97 HATFIELD spinal fusion curette fig. 000 sharp straight length 23 cm
 32-5007-97 HATFIELD spinal fusion curette fig. 000 sharp straight length 28 cm
 32-5006-01 HATFIELD spinal fusion curette fig. 1 sharp straight length 23 cm
 32-5008-01 HATFIELD spinal fusion curette fig. 1 sharp straight length 28 cm
 32-5006-02 HATFIELD spinal fusion curette fig. 2 sharp straight length 23 cm
 32-5008-02 HATFIELD spinal fusion curette fig. 2 sharp straight length 28 cm
 32-5006-03 HATFIELD spinal fusion curette fig. 3 sharp straight length 23 cm
 32-5008-03 HATFIELD spinal fusion curette fig. 3 sharp straight length 28 cm
 32-5006-04 HATFIELD spinal fusion curette fig. 4 sharp straight length 23 cm
 32-5008-04 HATFIELD spinal fusion curette fig. 4 sharp straight length 28 cm
 32-5006-05 HATFIELD spinal fusion curette fig. 5 sharp straight length 23 cm
 32-5008-05 HATFIELD spinal fusion curette fig. 5 sharp straight length 28 cm
 32-5006-06 HATFIELD spinal fusion curette fig. 6 sharp straight length 23 cm
 32-5008-06 HATFIELD spinal fusion curette fig. 6 sharp straight length 28 cm


 32-5101-52 bone curette curved 25 cm 5,2 mm
 32-5101-60 bone curette curved 25 cm 6,0 mm
 32-5101-36 bone curette curved 25 cm 3,6 mm
 32-5101-44 bone curette curved 25 cm 4,4 mm
 32-5100-60 bone curette straight 25 cm 6,0 mm
 32-5100-36 bone curette straight 25 cm 3,6 mm
 32-5100-44 bone curette straight 25 cm 4,4 mm
 32-5100-52 bone curette straight 25 cm 5,2 mm
 32-5103-03 BUSHE curette curved backward 3mm
 32-5103-04 BUSHE curette curved backward 4mm
 32-5103-05 BUSHE curette curved backward 5mm
 32-5130-15 JANSEN double spoon sharp
 32-5140-13 STANLEY BOYD double curette 13 cm oval/oval
 32-5140-16 STANLEY BOYD double curette 16 cm oval/oval
 32-5140-20 STANLEY BOYD double curette 20 cm oval/oval
 32-5120-01 VOLKMANN double curette sharp Fig. 1
 32-5120-02 VOLKMANN double curette sharp Fig. 2
 32-5120-03 VOLKMANN double curette sharp Fig. 3


 32-5314-18 BARTH ear spoon double sharp
 32-5310-21 curette double sharp oval/round
 32-5312-14 JACOBSON double curette 14 cm
 32-5308-01 MARTINI double curette Fig. 0/1 round/round
 32-5308-12 MARTINI double curette Fig. 1/2 round/round
 32-5308-00 MARTINI double curette Fig. 00/0 round/round
 32-5302-13   32-5302-14   32-5302-17 VOLKMANN double curette sharp oval/oval
 32-5304-13   32-5304-14   32-5304-17   32-5304-20 VOLKMANN double curette sharp round/oval
 32-5306-01 WILLIGER double curette Fig. 0/1 oval/oval
 32-5306-12 WILLIGER double curette Fig. 1/2 oval/oval
 32-5306-00 WILLIGER double curette Fig. 00/0 oval/oval


 32-5800-78 chisel blade interch.25 x 78mm
 32-5800-05 chisel blade interchang. 5 mm
 32-5800-10 chisel blade interchang. 10 mm
 32-5800-16 chisel blade interchang. 16 mm
 32-5800-25 chisel blade interchang. 25 mm
 32-5800-00 chisel handle interchangeable
 32-5800-99 key for 32-5800-00
 32-5401-25 KRAEMER chisel f. osteophytes 2,5mm 17cm
 32-5998-03 MANNERFELDT gouge 3 mm 16 cm
 32-6000-04 MANNERFELT osteotome 4 mm 16 cm
 32-6000-06 MANNERFELT osteotome 6 mm 16 cm
 32-6000-08 MANNERFELT osteotome 8 mm 16 cm


 32-6004-04 bone chisel 13,5 cm 4 mm
 32-6004-06 bone chisel 13,5 cm 6 mm
 32-6004-08 bone chisel 13,5 cm 8 mm
 32-6004-10 bone chisel 13,5 cm 10 mm
 32-6004-12 bone chisel 13,5 cm 12 mm
 32-6004-14 bone chisel 13,5 cm 14 mm
 32-6004-16 bone chisel 13,5 cm 16 mm
 32-6010-03 EAST GRINSTEAD (WARD) chisel 3 mm 18 cm
 32-6010-05 EAST GRINSTEAD (WARD) chisel 5 mm 18 cm
 32-6012-03 EAST GRINSTEAD (WARD) osteotome 3 mm 18 cm
 32-6012-05 EAST GRINSTEAD (WARD) osteotome 5 mm 18 cm
 32-6020-03 EASTMAN chisel 3 mm 19 cm
 32-6020-05 EASTMAN chisel 5 mm 19 cm
 32-6005-04 gouge 13,5 cm 4 mm
 32-6005-08 gouge 13,5 cm 8 mm
 32-6005-10 gouge 13,5 cm 10 mm
 32-6005-12 gouge 13,5 cm 12 mm
 32-6005-14 gouge 13,5 cm 14 mm
 32-6005-16 gouge 13,5 cm 16 mm
 32-6005-06 gouge 13,5 cm 6 mm
 32-6002-02 osteotome 13,5 cm 2 mm
 32-6002-04 osteotome 13,5 cm 4 mm
 32-6002-06 osteotome 13,5 cm 6 mm
 32-6002-08 osteotome 13,5 cm 8 mm
 32-6002-10 osteotome 13,5 cm 10 mm
 32-6002-12 osteotome 13,5 cm 12 mm
 32-6002-14 osteotome 13,5 cm 14 mm
 32-6002-16 osteotome 13,5 cm 16 mm


 32-6100-04 ALEXANDER chisel 17 cm 4 mm
 32-6100-06 ALEXANDER chisel 17 cm 6 mm
 32-6100-08 ALEXANDER chisel 17 cm 8 mm
 32-6100-10 ALEXANDER chisel 17 cm 10 mm
 32-6100-12 ALEXANDER chisel 17 cm 12 mm
 32-6100-14 ALEXANDER chisel 17 cm 14 mm
 32-6101-04 ALEXANDER gouge 17 cm 4 mm
 32-6101-06 ALEXANDER gouge 17 cm 6 mm
 32-6101-08 ALEXANDER gouge 17 cm 8 mm
 32-6101-10 ALEXANDER gouge 17 cm 10 mm
 32-6101-12 ALEXANDER gouge 17 cm 12 mm
 32-6101-14 ALEXANDER gouge 17 cm 14 mm
 32-6110-01   32-6111-02   32-6111-03   32-6111-04 BUCK GRAMCKO gouge 13,5 cm 3,4 mm
 32-6114-11 GILLIES (FRENCH) osteotome 14 cm 11 mm
 32-6114-05 GILLIES (FRENCH) osteotome 14 cm 5 mm
 32-6114-07 GILLIES (FRENCH) osteotome 14 cm 7 mm
 32-6114-09 GILLIES (FRENCH) osteotome 14 cm 9 mm
 32-6200-02 PARTSCH bone chisel 13,5 cm 2 mm
 32-6200-03 PARTSCH bone chisel 13,5 cm 3mm
 32-6200-04 PARTSCH bone chisel 13,5 cm 4 mm
 32-6200-05 PARTSCH bone chisel 13,5 cm 5 mm
 32-6200-06 PARTSCH bone chisel 13,5 cm 6 mm
 32-6200-07 PARTSCH bone chisel 13,5 cm 7mm
 32-6200-08 PARTSCH bone chisel 13,5cm 8mm
 32-6200-10 PARTSCH bone chisel 13,5cm10mm
 32-6200-12 PARTSCH bone chisel 13,5cm12mm
 32-6202-10 PARTSCH bone chisel 17 cm 10 mm
 32-6202-12 PARTSCH bone chisel 17 cm 12 mm
 32-6202-02 PARTSCH bone chisel 17 cm 2 mm
 32-6202-03 PARTSCH bone chisel 17 cm 3 mm
 32-6202-04 PARTSCH bone chisel 17 cm 4 mm
 32-6202-05 PARTSCH bone chisel 17 cm 5 mm
 32-6202-06 PARTSCH bone chisel 17 cm 6 mm
 32-6202-07 PARTSCH bone chisel 17 cm 7 mm
 32-6202-08 PARTSCH bone chisel 17 cm 8 mm
 32-6203-02 PARTSCH gouge 13,5 cm 2 mm
 32-6203-03 PARTSCH gouge 13,5 cm 3 mm
 32-6203-04 PARTSCH gouge 13,5 cm 4 mm
 32-6203-05 PARTSCH gouge 13,5 cm 5 mm
 32-6203-06 PARTSCH gouge 13,5 cm 6 mm
 32-6203-07 PARTSCH gouge 13,5 cm 7 mm
 32-6203-08 PARTSCH gouge 13,5 cm 8 mm
 32-6203-10 PARTSCH gouge 13,5 cm 10 mm
 32-6205-02 PARTSCH gouge 17 cm 2 mm
 32-6205-03 PARTSCH gouge 17 cm 3 mm
 32-6205-04 PARTSCH gouge 17 cm 4 mm
 32-6205-05 PARTSCH gouge 17 cm 5 mm
 32-6205-06 PARTSCH gouge 17 cm 6 mm
 32-6205-07 PARTSCH gouge 17 cm 7 mm
 32-6205-08 PARTSCH gouge 17 cm 8 mm


 32-6405-06 SMITH PETERSEN chisel cvd. 6mm
 32-6405-09 SMITH PETERSEN chisel cvd. 9mm
 32-6405-13 SMITH PETERSEN chisel cvd.13mm
 32-6405-16 SMITH PETERSEN chisel cvd.16mm
 32-6404-06 SMITH PETERSEN chisel str. 6mm
 32-6404-09 SMITH PETERSEN chisel str. 9mm
 32-6404-13 SMITH PETERSEN chisel str.13mm
 32-6404-16 SMITH PETERSEN chisel str.16mm
 32-6404-19 SMITH PETERSEN chisel str.19mm
 32-6404-25 SMITH PETERSEN chisel str.25mm
 32-6404-32 SMITH PETERSEN chisel str.32mm
 32-6405-19 SMITH PETERSEN chisel.cvd.19mm
 32-6405-25 SMITH PETERSEN chisel.cvd.25mm
 32-6405-32 SMITH PETERSEN chisel.cvd.32mm
 32-6409-06 SMITH PETERSEN gouge cvd. 6mm
 32-6409-09 SMITH PETERSEN gouge cvd. 9mm
 32-6409-13 SMITH PETERSEN gouge cvd. 13mm
 32-6409-16 SMITH PETERSEN gouge cvd. 16mm
 32-6409-19 SMITH PETERSEN gouge cvd. 19mm
 32-6409-25 SMITH PETERSEN gouge cvd. 25mm
 32-6409-32 SMITH PETERSEN gouge cvd. 32mm
 32-6407-06 SMITH PETERSEN gouge str. 6mm
 32-6407-09 SMITH PETERSEN gouge str. 9mm
 32-6407-13 SMITH PETERSEN gouge str. 13mm
 32-6407-16 SMITH PETERSEN gouge str. 16mm
 32-6407-19 SMITH PETERSEN gouge str. 19mm
 32-6407-25 SMITH PETERSEN gouge str. 25mm
 32-6407-32 SMITH PETERSEN gouge str. 32mm
 32-6300-06 STILLE bone chisel 20 cm 6 mm
 32-6300-08 STILLE bone chisel 20 cm 8 mm
 32-6300-10 STILLE bone chisel 20 cm 10 mm
 32-6300-12 STILLE bone chisel 20 cm 12 mm
 32-6300-15 STILLE bone chisel 20 cm 15 mm
 32-6300-20 STILLE bone chisel 20 cm 20 mm
 32-6300-25 STILLE bone chisel 20 cm 25 mm
 32-6300-30 STILLE bone chisel 20 cm 30 mm
 32-6305-06 STILLE gouge 20 cm 6mm
 32-6305-08 STILLE gouge 20 cm 8mm
 32-6305-10 STILLE gouge 20 cm 10 mm
 32-6305-12 STILLE gouge 20 cm 12 mm
 32-6305-15 STILLE gouge 20 cm 15 mm
 32-6305-20 STILLE gouge 20 cm 20 mm
 32-6305-25 STILLE gouge 20 cm 25 mm
 32-6305-30 STILLE gouge 20 cm 30 mm
 32-6303-08 STILLE oseotome 20 cm 8 mm curved
 32-6302-06 STILLE osteotome 20 cm 6 mm
 32-6303-06 STILLE osteotome 20 cm 6 mm curved
 32-6302-08 STILLE osteotome 20 cm 8 mm
 32-6302-10 STILLE osteotome 20 cm 10 mm
 32-6303-10 STILLE osteotome 20 cm 10 mm curved
 32-6302-12 STILLE osteotome 20 cm 12 mm
 32-6303-12 STILLE osteotome 20 cm 12 mm curved
 32-6302-15 STILLE osteotome 20 cm 15 mm
 32-6303-15 STILLE osteotome 20 cm 15 mm curved
 32-6302-20 STILLE osteotome 20 cm 20 mm
 32-6303-20 STILLE osteotome 20 cm 20 mm curved
 32-6302-25 STILLE osteotome 20 cm 25 mm
 32-6303-25 STILLE osteotome 20 cm 25 mm curved
 32-6302-30 STILLE osteotome 20 cm 30 mm


 32-6502-02 LAMBOTTE mini osteot.17cm 2mm
 32-6502-03 LAMBOTTE mini osteot.17cm 3mm
 32-6502-04 LAMBOTTE mini osteot.17cm 4mm
 32-6502-06 LAMBOTTE mini osteot.17cm 6mm
 32-6502-08 LAMBOTTE mini osteot.17cm 8mm
 32-6502-10 LAMBOTTE mini osteot.17cm 10mm
 32-6502-12 LAMBOTTE mini osteot.17cm 12mm
 32-6502-15 LAMBOTTE mini osteot.17cm 15mm
 32-6504-02 LAMBOTTE mini osteotome 2 mm
 32-6504-03 LAMBOTTE mini osteotome 3 mm
 32-6504-04 LAMBOTTE mini osteotome 4 mm
 32-6504-06 LAMBOTTE mini osteotome 6 mm
 32-6504-08 LAMBOTTE mini osteotome 8 mm
 32-6504-10 LAMBOTTE mini osteotome 10 mm
 32-6504-12 LAMBOTTE mini osteotome 12 mm
 32-6504-15 LAMBOTTE mini osteotome 15 mm
 32-6501-50 LAMBOTTE osteot. 23cm cvd.50mm
 32-6500-50 LAMBOTTE osteot. 24cm str.50mm
 32-6501-10 LAMBOTTE osteot.23cm cvd.10 mm
 32-6501-13 LAMBOTTE osteot.23cm cvd.13 mm
 32-6501-15 LAMBOTTE osteot.23cm cvd.15 mm
 32-6501-18 LAMBOTTE osteot.23cm cvd.18 mm
 32-6501-20 LAMBOTTE osteot.23cm cvd.20 mm
 32-6501-25 LAMBOTTE osteot.23cm cvd.25 mm
 32-6501-30 LAMBOTTE osteot.23cm cvd.30 mm
 32-6501-38 LAMBOTTE osteot.23cm cvd.38 mm
 32-6501-04 LAMBOTTE osteot.23cm cvd.4,0mm
 32-6501-44 LAMBOTTE osteot.23cm cvd.44 mm
 32-6501-06 LAMBOTTE osteot.23cm cvd.6,5mm
 32-6501-08 LAMBOTTE osteot.24cm cvd. 8 mm
 32-6500-04 LAMBOTTE osteot.24cm str. 4 mm
 32-6500-08 LAMBOTTE osteot.24cm str. 8 mm
 32-6500-10 LAMBOTTE osteot.24cm str.10 mm
 32-6500-13 LAMBOTTE osteot.24cm str.13 mm
 32-6500-15 LAMBOTTE osteot.24cm str.15 mm
 32-6500-18 LAMBOTTE osteot.24cm str.18 mm
 32-6500-20 LAMBOTTE osteot.24cm str.20 mm
 32-6500-25 LAMBOTTE osteot.24cm str.25 mm
 32-6500-30 LAMBOTTE osteot.24cm str.30 mm
 32-6500-38 LAMBOTTE osteot.24cm str.38 mm
 32-6500-44 LAMBOTTE osteot.24cm str.44 mm
 32-6500-06 LAMBOTTE osteot.24cm str.6,5mm
 32-6510-04 LAMBOTTE osteotome 4 mm 25 cm
 32-6510-06 LAMBOTTE osteotome 6 mm 25 cm
 32-6510-08 LAMBOTTE osteotome 8 mm 25 cm
 32-6510-10 LAMBOTTE osteotome 10 mm 25 cm
 32-6600-05 LEXER bone chisel 22 cm 5 mm
 32-6600-07 LEXER bone chisel 22 cm 7 mm
 32-6600-10 LEXER bone chisel 22 cm 10 mm
 32-6600-15 LEXER bone chisel 22 cm 15 mm
 32-6600-20 LEXER bone chisel 22 cm 20 mm
 32-6600-25 LEXER bone chisel 22 cm 25 mm
 32-6600-30 LEXER bone chisel 22 cm 30 mm
 32-6601-05 LEXER gouge 22 cm 5 mm
 32-6601-07 LEXER gouge 22 cm 7 mm
 32-6601-10 LEXER gouge 22 cm 10 mm
 32-6601-15 LEXER gouge 22 cm 15 mm
 32-6601-20 LEXER gouge 22 cm 20 mm
 32-6601-25 LEXER gouge 22 cm 25 mm
 32-6601-30 LEXER gouge 22 cm 30 mm
 32-6604-04 LEXER mini chisel 4 mm
 32-6604-06 LEXER mini chisel 6 mm
 32-6604-08 LEXER mini chisel 8 mm
 32-6604-10 LEXER mini chisel 10 mm
 32-6604-12 LEXER mini chisel 12 mm
 32-6521-10 NIEDERDELLMANN osteotome 10 mm 25 cm
 32-6521-08 NIEDERELLMANN Osteotome 8 mm 25 cm


 32-6621-03 COBB gouge spinal full curve
 32-6623-03 COBB gouge spinal full curve 28 cm
 32-6621-02 COBB gouge spinal lesser curve
 32-6623-02 COBB gouge spinal lesser curved 28 cm
 32-6621-04 COBB gouge spinal reverse cve.
 32-6623-04 COBB gouge spinal reverse cve. 28 cm
 32-6620-01 COBB gouge spinal straight
 32-6622-01 COBB gouge spinal straight 28 cm
 32-6611-05   32-6611-10   32-6611-15 LEXER chisel spongiosa curved
 32-6610-05   32-6610-10   32-6610-15 LEXER chisel spongiosa strght.
 32-6609-10 LEXER gouge angled 28 cm 10 mm
 32-6609-15 LEXER gouge angled 28 cm 15 mm
 32-6605-04 LEXER mini gouge 4 mm
 32-6605-06 LEXER mini gouge 6 mm
 32-6605-08 LEXER mini gouge 8 mm
 32-6605-10 LEXER mini gouge 10 mm
 32-6605-12 LEXER mini gouge 12 mm
 32-6607-10 LEXER osteotome angl.28cm 10mm
 32-6607-15 LEXER osteotome angl.28cm 15mm


 32-6689-09 gouge f. removing of brok.scr.
 32-6702-06 HIBBS bone chisel 24cm st. 6mm
 32-6702-13 HIBBS bone chisel 24cm st.13mm
 32-6702-19 HIBBS bone chisel 24cm st.19mm
 32-6702-25 HIBBS bone chisel 24cm st.25mm
 32-6702-32 HIBBS bone chisel 24cm st.32mm
 32-6705-06 HIBBS gouge 24cm curved 6 mm
 32-6705-13 HIBBS gouge 24cm curved 13 mm
 32-6705-19 HIBBS gouge 24cm curved 19 mm
 32-6705-25 HIBBS gouge 24cm curved 25 mm
 32-6705-32 HIBBS gouge 24cm curved 32 mm
 32-6703-06 HIBBS gouge 24cm straight 6mm
 32-6703-13 HIBBS gouge 24cm straight 13mm
 32-6703-19 HIBBS gouge 24cm straight 19mm
 32-6703-25 HIBBS gouge 24cm straight 25mm
 32-6703-32 HIBBS gouge 24cm straight 32mm
 32-6700-06 HIBBS osteotome 24 cm str. 6mm
 32-6700-13 HIBBS osteotome 24 cm str.13mm
 32-6700-19 HIBBS osteotome 24 cm str.19mm
 32-6700-25 HIBBS osteotome 24 cm str.25mm
 32-6700-32 HIBBS osteotome 24 cm str.32mm
 32-6701-06 HIBBS osteotome 24cm cvd. 6mm
 32-6701-13 HIBBS osteotome 24cm cvd. 13mm
 32-6701-19 HIBBS osteotome 24cm cvd. 19mm
 32-6701-25 HIBBS osteotome 24cm cvd. 25mm
 32-6701-32 HIBBS osteotome 24cm cvd. 32mm
 32-6698-03 HOKE chisel 17 cm 3 mm
 32-6698-05 HOKE chisel 17 cm 5 mm
 32-6698-06 HOKE chisel 17 cm 6 mm
 32-6698-08 HOKE chisel 17 cm 8 mm
 32-6698-09 HOKE chisel 17 cm 9 mm
 32-6631-05 ZIELKE scoliosis gouge 23 cm 5,5 mm
 32-6631-09 ZIELKE scoliosis gouge 23 cm 9 mm


 32-6760-03 CASPAR tamper 20 cm ø 3 mm
 32-6760-05 CASPAR tamper 20 cm ø 5 mm
 32-6760-08 CASPAR tamper 20 cm ø 8 mm
 32-6714-16 chisel plastic handle 16 mm
 32-6712-20 chisel plastic handle 20 mm
 32-6770-12 DEMOISELLE plugger ø 12 mm 20x12 mm 18 cm
 32-6770-05 DEMOISELLE plugger ø 6 mm 8 x 5 mm 18 cm
 32-6770-08 DEMOISELLE plugger ø 8 mm 12 x 8 mm 18 cm
 32-6710-10   32-6711-10 osteotome plast.hdle.20cm 10mm
 32-6710-15   32-6711-15 osteotome plast.hdle.20cm 15mm
 32-6710-20   32-6711-20 osteotome plast.hdle.20cm 20mm
 32-6766-15 plugger 10 x 15 mm 18 cm
 32-6766-20 plugger 11 x 20 mm 18 cm
 32-6752-02 plugger 15,5 cm 2 mm
 32-6752-03 plugger 15,5 cm 3 mm
 32-6752-04 plugger 15,5 cm 4 mm
 32-6752-05 plugger 15,5 cm 5 mm
 32-6752-06 plugger 15,5 cm 6 mm
 32-6752-08 plugger 15,5 cm 8 mm
 32-6752-10 plugger 15,5 cm 10 mm
 32-6766-13 plugger 6 x 13 mm 18 cm
 32-6764-02 plugger ø 10x12 mm 21 cm
 32-6768-10 plugger ø 10x16 mm 17 cm
 32-6764-01 plugger ø 6 x 8 mm 21 cm
 32-6762-12 tamper 20 cm ø 12 mm
 32-6762-14 tamper 20 cm ø 14 mm
 32-6762-16 tamper 20 cm ø 16 mm


 32-6801-28 BRUNETTI spine chisel28cm left
 32-6803-28 BRUNETTI spine chisel28cm rght
 32-6772-10 HAASE tamper 5,7 mm 10 cm
 32-6788-24 LEBSCHE sternum chisel 24,5 cm
 32-6791-22 rachiotome 22 cm
 32-6794-12 VIRCHOW skull breaker 12 mm


 32-6805-01 dissect.set in plastic pouch
 32-6805-04 dissect.set in wooden box
 32-6805-99 osteotome 23 mm 13 cm
 32-6804-00 post mortem set
 32-6805-90 skull breaker 14 cm


 32-6902-22 COLLIN hammer 20 cm 220 g = 7 3/4oz
 32-6809-24 COTTLE mallet 240 g 19 cm
 32-6806-25 GERZOG hammer 18cm/250g = 8 oz
 32-6900-45 hammer 26,5 cm 450 g = 1 lb
 32-6900-90 hammer 26,5 cm 900 g = 2 lb
 32-6824-51 hammer repercussion free 26,5 cm
 32-6826-00 hammer steel 26,5 cm 510 g
 32-6820-48 hammer steel w.plastic handle
 32-6822-00 hammer with plastic handle
 32-6808-75 KIRK hammer 19cm/750g = 24 oz ø 35 mm
 32-6812-55 OMBREDANNE mallet 550g ø 40 mm


 32-6905-45 BERGMANN mallet 300 g ø 45 mm
 32-6905-30 BERGMANN mallet 300 g ø 30 mm
 32-6910-12 DOYEN hammer 120 g
 32-6910-18 DOYEN hammer 180 g
 32-6910-26 DOYEN hammer 260 g
 32-6916-20 HAJEK mallet 140 g ø 27 mm
 32-6903-30 hammer handle artif.wood 300 g 22 cm diametre 30 mm
 32-6903-50 hammer handle artif.wood 500 g diametre 35 mm
 32-6903-70 hammer handle made of PTFE 700 g diametre 40 mm
 32-6912-14 hammer surgical 140 g
 32-6906-23 LUCAE hammer 19cm 230 g = 8 oz
 32-6906-26 LUCAE hammer 19cm 260 g = 9 oz
 32-6914-20 PARTSCH hammer 200 g
 32-6904-30 WILLIGER hammer 24cm 300g=10oz
 32-6904-34 WILLIGER hammer 24cm 340g=12oz
 32-6904-40 WILLIGER hammer 24cm 400g=14oz


 32-6974-14 hammer 140g 2 exch.plast.disks
 32-6978-25 hammer artif.mat. 26 cm 250 g ø 40 mm
 32-6978-40 hammer lead filled 26 cm 400 g
 32-6970-37 hammer plastic 370 g
 32-6976-32 MEAD hammer exchang.faces 17cm
 32-6976-99 pair of interchangeable faces
 32-6974-99 pair of spare disks plastic
 32-6970-99 spare faces for 32-6970-37
 32-6968-00 WAGNER hammer complete
 32-6968-23 WAGNER metal faces pair 230 g
 32-6968-32 WAGNER plastic faces pair 32 g
 32-6968-99 wrench for 32-6968-00


 32-6984-13 hammer plastic 125 g
 32-6982-40 Hammer plastic lead fill. 400 g
 32-6988-53 hammer with aluminium handle 530 g
 32-6986-29 hammer wood lead filled 290 g
 32-6990-70 HEATH mallet 700 g ø 40 mm
 32-6980-40 STEINBACH mallet 400 g


 32-6999-00 hammer with hook handle 23,5cm
 32-6994-10 HEATH mallet 1000 g ø 45 mm
 32-6992-08 JUDET hammer 800 g
 32-6992-10 JUDET hammer 1000 g
 32-6992-12 JUDET hammer 1200 g
 32-6996-75 MAC EVEN hammer 1 face 750 g ø 40 mm 22 cm
 32-6996-25 MAC EVEN hammer 1 face 250 g ø 25 mm 22 cm
 32-6996-35 MAC EVEN hammer 1 face 350 g ø 30 mm 22 cm
 32-6996-50 MAC EVEN hammer 1 face 500 g ø 35 mm 22 cm
 32-6997-25 MAC EVEN hammer 2 faces 250 g ø 25 mm 22 cm
 32-6997-35 MAC EVEN hammer 2 faces 350 g ø 30 mm 22 cm
 32-6997-50 MAC EVEN hammer 2 faces 500 g ø 35 mm 22 cm
 32-6997-60 MAC EVEN hammer 2 faces 600 g ø 40 mm 22 cm
 32-6997-75 MAC EVEN hammer 2 faces 750 g ø 45 mm 22 cm
 32-6998-75 QUISLING hammer intranasal


 32-7004-16   32-7005-16 FARABEUF COLLIN periosteal
 32-7003-15 FARABEUF periosteal 15cm crvd.
 32-7002-15 FARABEUF periosteal 15cm strgt
 32-7007-05 LAMBOTTE periosteal 21 cm 5 mm
 32-7007-10 LAMBOTTE periosteal 21 cm 10 mm
 32-7007-20 LAMBOTTE periosteal 21 cm 20 mm
 32-7007-25 LAMBOTTE periosteal 21 cm 25 mm
 32-7007-15 LAMBOTTE periosteal 21cm 15 mm
 32-7011-18 SEDILLOT periosteal 18,5 cm/18 mm
 32-7009-21 SEDILLOT periosteal 21 cm


 32-7013-18 BRISTOW periosteal elevator 18 cm
 32-7021-20 DEWAR (COBB) perio. elevator
 32-7105-16 JANSEN periosteal 16,5 cm
 32-7102-19 LANGENBECK elevator 19 cm
 32-7103-18 LANGENBECK periosteal 18 cm
 32-7100-06 MATHIEU raspatory 14 cm 6 mm
 32-7100-09 MATHIEU raspatory 14 cm 9 mm
 32-7107-17 SCHNEIDER periosteal 17,5 cm


 32-7111-15   32-7113-19 CUSHING Little Joker Per.Elev.
 32-7177-15 KOENIG periostotome 15,5 cm
 32-7179-06 periostotome 6 mm
 32-7179-08 periostotome 8 mm
 32-7109-19 SCHNEIDER SAUERBR. periosteal
 32-7118-04 WIBERG perio.elev. 4 mm fig.1
 32-7118-07 WIBERG perio.elev. 7 mm fig.2
 32-7118-09 WIBERG perio.elev. 9 mm fig.3
 32-7118-12 WIBERG perio.elev. 12 mm fig.4
 32-7181-13 WILLIGER periostotome 13 cm


 32-7185-16 ALEXANDER periosteal 16 cm
 32-7185-20 ALEXANDER periosteal 20 cm
 32-7201-17   32-7201-24   32-7203-17   32-7203-24 DOYEN costal periosteal adult
 32-7205-17   32-7207-17 DOYEN costal periosteal child
 32-7184-04 KAHRE WILLIGER periostotome 4 mm 16,5 cm
 32-7184-05 KAHRE WILLIGER periostotome 5 mm 16,5 cm
 32-7182-05 periostotome 5 cm 16 cm
 32-7182-06 periostotome 6 cm 16 cm
 32-7182-07 periostotome 7 cm 16 cm
 32-7183-16 WILLIGER periosteal 6 mm 16 cm
 32-7183-17 WILLIGER periosteal 7 mm 16 cm


 32-7301-22 MATSON ALEXANDER periosteal
 32-7303-22 MATSON periosteal 22 cm
 32-7305-29   32-7307-29   32-7309-28 OVERHOLT double periosteal
 32-7209-01   32-7209-03 SEMB costal periosteal 17,5 cm
 32-7209-05   32-7209-06 SEMB costal periosteal 20,5 cm
 32-7209-02   32-7209-04 SEMB costal periosteal 21,0 cm
 32-7209-07 SEMB costal periosteal 22,5 cm


 32-7404-02 CASPAR elevator large 20,5 cm
 32-7404-01 CASPAR elevator small 20,5 cm
 32-7401-62   32-7402-62 CASPAR raspatory 18 cm 6,2 mm
 32-7457-15   32-7459-15 KOENIG elevator 15 cm 4,5 mm
 32-7400-47 LANDOLT raspatory 17,5cm 4,7mm
 32-7453-19 QUERVAIN elevator 19,5 cm 6 mm
 32-7403-03 raspatory 17 cm long 3 mm wide
 32-7403-06 raspatory 17 cm long 6 mm wide
 32-7451-17 SEBILAU elevator 17 cm 5 mm


 32-7504-17   32-7505-17   32-7506-17   32-7507-17 ADSON elevator 17 cm
 32-7495-18 CAIRN skull flap elevator 18 cm
 32-7503-18 JONES elevator 18,5 cm pistol shaped handle
 32-7490-05 LANGENBECK elevator 5 mm 17 cm
 32-7490-07 LANGENBECK elevator 7 mm 17 cm
 32-7490-08 LANGENBECK elevator 8 mm 19,5 cm
 32-7490-10 LANGENBECK elevator 10 mm 19,5 cm
 32-7501-10 LANGENBECK elevator 20 cm 10 mm
 32-7501-08 LANGENBECK elevator 20 cm 8 mm
 32-7496-18 OHL preiosteal raspatory double 18 cm
 32-7494-02 SAYRE bone retractor blunt 17 cm 9 mm
 32-7494-01 SAYRE bone retractor pointed 17 cm 9 mm
 32-7461-16   32-7461-17 WILLIGER elevator


 32-7603-18 CUSHING perio.elev. 16mm round
 32-7604-18 CUSHING perio.elev. 16mm squar
 32-7602-19 CUSHING perio.elev.narrow 5 mm 19,5 cm
 32-7609-17 elevator light weight 17,5 cm
 32-7611-21 HOWARTH elevator d/e. 22 cm
 32-7509-06 KEY elevator 19 cm 6 mm
 32-7509-10 KEY elevator 19 cm 10 mm
 32-7509-12 KEY elevator 19 cm 12 mm
 32-7509-13 KEY elevator 19 cm 13 mm
 32-7509-19 KEY elevator 19 cm 19 mm
 32-7509-25 KEY elevator 19 cm 25 mm
 32-7607-19 McDONALD elevator double 19 cm
 32-7613-18 SYME periosteal 4 mm/4 mm 18,5 cm
 32-7605-17 WATSON CHEYNE elevat.doub.17,5


 32-7615-01   32-7615-02   32-7615-03   32-7615-04 MÜHLING raspatory 4 mm curved 17 cm
 32-7621-01 periostotome plast.handle str.
 32-7621-02   32-7621-03   32-7621-04 periostotome plastic handle


 32-7623-04 periostotome plast.handle 20cm
 32-7623-01   32-7623-03 periostotome plast.handle cvd.
 32-7623-02 periostotome plast.handle str.


 32-7631-10 COBB elevator spinal 28cm/10mm
 32-7631-13 COBB elevator spinal 28cm/13mm
 32-7631-19 COBB elevator spinal 28cm/19mm
 32-7633-07 HOEN periostotome 16 cm 7 mm
 32-7635-15 HOEN periostotome 18,5 cm 15 mm
 32-7637-20 HOEN periostotome 19 cm 20 mm


 32-7681-32 FUKUDA shoulder retractor 18 cm 32x81 mm
 32-7681-38 FUKUDA shoulder retractor 18 cm 38x81 mm
 32-7641-11 Mc GLAMRY elevator 16,5 cm 11 mm
 32-7641-13 Mc GLAMRY elevator 16,5 cm 13 mm
 32-7641-15 Mc GLAMRY elevator 16,5 cm 15 mm
 32-7641-17 Mc GLAMRY elevator 16,5 cm 17 mm
 32-7639-10 MERLE D'AUBIGNE periost.cvd. 10 mm 23 cm
 32-7639-12 MERLE D'AUBIGNE periost.cvd. 12 mm 23 cm
 32-7638-10 MERLE D'AUBIGNE periost.str. 10 mm 23 cm
 32-7638-12 MERLE D'AUBIGNE periost.str. 12 mm 23 cm
 32-7687-33 MEYERDING bone lever 33 cm
 32-7689-30 MURPHY LANE elevat.double 30cm


 32-7701-73 BENNETT bone lever 45 x 240 mm
 32-7701-71 BENNETT bone lever 65 x 240 mm
 32-7936-22 bone lever 22 mm 24 cm 90º
 32-7926-30 bone lever 22 mm 30 cm
 32-7936-28   32-7940-28 bone lever 28 mm 24 cm 90º
 32-7936-40   32-7940-40 bone lever 40 mm 24 cm 90º
 32-7924-29 bone lever 40 mm 29 cm
 32-7930-24 HOHMANN ALDINGER bone lever
 32-7916-17 HOHMANN bone lever 17 mm 24 cm
 32-7703-20 MERLE D'AUBIGNE bone lever 40 x 20 mm
 32-7703-30 MERLE D'AUBIGNE bone lever 40 x 30 mm
 32-7920-37 SCHUMACHER WAGNER bone lever 18/37 mm 34 cm
 32-7910-22 WAGNER lever 17 mm 22 cm


 32-7952-22 bone lever 22 mm 24 cm 60º
 32-7970-22   32-7982-22 bone lever 22 mm 31,5 cm 30º
 32-7948-22 bone lever 24 cm 22 mm 90º
 32-7944-28   32-7948-28 bone lever 28 mm 24 cm 90º
 32-7954-28   32-7958-28   32-7962-28   32-7966-28 bone lever 28 mm 30 cm 45º
 32-7978-28 bone lever 28 mm 31,5 cm 30º
 32-7958-40   32-7962-40 bone lever 40 mm 30 cm 45º
 32-7974-28 bone leverl 28 mm 31,5 cm 30º


 32-8001-08 HOHMANN bone lever 8 mm
 32-8001-17 HOHMANN bone lever 17 mm broad working end
 32-8001-18 HOHMANN bone lever 18 mm narrow tip
 32-8003-43 HOHMANN bone lever 43 mm
 32-8001-70 HOHMANN bone lever 70 mm
 32-8001-43 VERBRUGGE HOHMANN bone lever 43 mm


 32-8017-18 bone lever 22 cm 18 mm for humeral head
 32-8015-24 bone lever 27,5 cm 24 mm
 32-8005-22 HOHMANN bone lever 22 mm
 32-8007-24 HOHMANN bone lever 24 mm
 32-8013-40 HOHMANN bone lever 33 cm 40 mm 90º
 32-8005-33 HOHMANN bone lever 33 mm
 32-8009-22 LANGE HOHMANN bone lever 22 mm
 32-8011-27 LANGE HOHMANN lever 30mm 27cm
 32-8011-28 LANGE HOHMANN lever 34mm 29cm


 32-8021-02 AUFRANC Cobra bone retractor blunt serrated tip 26 cm 32 mm
 32-8021-03 AUFRANC Cobra bone retractor blunt smooth tip 26 cm 32 mm
 32-8021-01 AUFRANC Cobra bone retractor pointed serrated tip 26 cm 32 mm
 32-8103-13 HAYES bone lever 13,5 cm 13x38 mm
 32-8103-16 HAYES bone lever 16,0 cm 13x38 mm
 32-8101-06   32-8101-08 HOHMANN mini bone lever 16 cm


 32-8105-28 bone lever 14 cm 2,8 mm
 32-8105-45 bone lever 15 cm 4,5 mm
 32-8105-60 bone lever 15 cm 6,0 mm
 32-8111-15 bone lever 15 mm
 32-8113-16 bone lever 16 mm
 32-8109-15 BUCK GRAMCKO bone lever 15 cm
 32-8107-55 lever phalangeal 16 cm 5,5 mm


 32-8137-21 ALDERDYCE dissector double end
 32-8203-26 BLOUNT bone lever 26 cm
 32-8205-26 BLOUNT bone lever 26 cm 2 hook
 32-8207-17 BLOUNT knee retractor 17,5 cm
 32-8115-25 LANE bone lever 260 mm
 32-8117-21 TRETHOWAN bone lever w. ring
 32-8121-23   32-8123-28 WATSON JONES bone lever


 32-8223-22 JACKSON BURROWS retract. broad
 32-8221-22 JACKSON BURROWS retract.narrow
 32-8305-27 LANE lever for small bones
 32-8208-32 SMILLIE knee retr.fg.1 19x32mm
 32-8208-45 SMILLIE knee retr.fg.2 19x45mm
 32-8208-60 SMILLIE knee retr.fg.3 19x60mm
 32-8209-55 SMILLIE knee retr.fg.4 13x55mm
 32-8211-25 SMILLIE knee retr.fg.5 13x25mm
 32-8211-15 SMILLIE knee retr.fg.6 13x15mm
 32-8301-16 TAYLOR spinal retract. 75x30mm
 32-8303-16 TAYLOR spinal retract.100x30mm
 32-8213-01 TRILLAT knee retr.fg.1 24 cm
 32-8213-02 TRILLAT knee retr.fg.2 24 cm


 32-9105-19 BIRCHER meniscot. 19cm angled
 32-9107-19 BIRCHER meniscotome 19cm
 32-9109-25 DOWNING meniscotome 25 cm
 32-9201-22 NEFF meniscotome 22cm cvd.left
 32-9203-22 NEFF meniscotome 22cm cvd.rght
 32-9100-17 SMILLIE meniscot.straight 17cm
 32-9101-17 SMILLIE meniscotome left 17 cm
 32-9103-17 SMILLIE meniscotome right17 cm


 32-9205-20 CANADA meniscus knife fig. 1 20 cm
 32-9207-20 CANADA meniscus knife fig. 2 20 cm
 32-9221-18 meniscotome 2 cutt.edg.curved
 32-9211-22 SALENIUS meniscotome left side
 32-9213-22 SALENIUS meniscotome right sid


 32-9691-28 bone file semi circular 20 mm
 32-9701-24 bone rasp 24,5 cm
 32-9702-22 bone rasp/bone file 22 cm
 32-9506-23 BUNNELL probe malleable 23 cm
 32-9500-01 BUNNELL tendon stripper fig. 1
 32-9500-02 BUNNELL tendon stripper fig. 2
 32-9500-03 BUNNELL tendon stripper fig. 3
 32-9500-04 BUNNELL tendon stripper fig. 4
 32-9500-05 BUNNELL tendon stripper fig. 5
 32-9703-27 PUTTI bone rasp dbl.end 27 cm
 32-9705-30 PUTTI bone rasp dbl.end 30 cm
 32-9502-40 tendon stripper 4 mm shaft malleable
 32-9502-45 tendon stripper 4,5 mm shaft malleable
 32-9502-55 tendon stripper 5 mm shaft malleable


 32-9900-00 bone mill with crank
 32-9900-04   32-9900-05 cutting drum for bone mill
 32-9901-00 fixing clamp to attach bone mill


Medical Specialization:

Bone Surgery
Traumatology

Catalog page: 33

 33-1001-01 compression apparatus complete
 33-1101-39 HELFERICH BIER amp.saw 3 blade
 33-1098-00 PERCY amputation shield folding handles
 33-1100-00 PERCY retractor for amputation
 33-1101-05 sawblade only 5 mm
 33-1101-06 sawblade only 6 mm
 33-1101-08 sawblade only 8 mm


 33-1102-00 CHARRIERE amputation saw
 33-1106-30 CHARRIERE amputation saw 30 cm
 33-1106-27 CHARRIERE blade saw
 33-1600-00 finger nail per.compl.w.3 tips
 33-1200-23 LANGENBECK finger saw 23 cm
 33-1602-13 RADOLF nail extracting forceps 13,5 cm
 33-1104-00 RUST amputation saw 4 blades
 33-1104-06 RUST spare saw blade 6 mm
 33-1104-08 RUST spare saw blade 8 mm
 33-1104-15 RUST spare saw blade 15 mm
 33-1104-20 RUST spare saw blade 20 mm
 33-1108-31 SATTERLEE amputation saw 31 cm
 33-1102-12 saw blade 12 mm
 33-1102-15 saw blade 15 mm
 33-1102-18 sawblade only 18 mm
 33-1600-01 set = 3 burrs for 33-1600-00
 33-1106-98 spare saw blade for 33-1106-27
 33-1106-99 spare saw blade for 33-1106-30
 33-1108-99 spare saw blade for 33-1108-31


 33-1710-10 FELDHEIM tourniquet 10 cm
 33-1703-00 finger ring cutter 17cm
 33-1705-00 fingerring saw forceps
 33-1703-01 saw blade only for 33-1703-00
 33-1705-01 saw blade only for 33-1705-00
 33-1701-00 WALTON finger ring saw 16 cm
 33-1705-99 wing screw alone


 33-2300-28 MOORE bone hand drill 28 cm
 33-2302-00 set=3 twist drills f. 33-2300-28
 33-2104-10 spheric.burr 10,0mm f. 33-2100-20
 33-2104-05 spheric.burr 5,0mm f. 33-2100-20
 33-2104-08 spheric.burr 8,0 mm f. 33-2100-20
 33-2104-12 spheric.burr12,0mm f. 33-2100-20
 33-2104-16 spheric.burr16,0mm f. 33-2100-20
 33-2100-20 STILLE bone hand drill 20 cm
 33-2200-24 STILLE SHERMAN bone drill cpl.
 33-2106-10 twist drill 1,0 mm f. 33-2100-20
 33-2106-15 twist drill 1,5 mm f. 33-2100-20
 33-2106-20 twist drill 2,0 mm f. 33-2100-20
 33-2102-25 twist drill 2,5 mm f. 33-2100-20
 33-2202-25 twist drill 2,5 mm f. 33-2200-24
 33-2102-30 twist drill 3,0 mm f. 33-2100-20
 33-2202-30 twist drill 3,0 mm f. 33-2200-24
 33-2102-35 twist drill 3,5 mm f. 33-2100-20
 33-2202-35 twist drill 3,5 mm f. 33-2200-24
 33-2102-40 twist drill 4,0 mm f. 33-2100-20


 33-2452-10 CUSHING flat burr 10 mm f. 33-2450-01
 33-2452-12 CUSHING flat burr 12 mm f. 33-2450-01
 33-2452-15 CUSHING flat burr 15 mm f. 33-2450-01
 33-2404-14 CUSHING flat burr f. 33-2400-27
 33-2414-16 D'ERRICO drill 16 mm
 33-2406-00 extension for 33-2400-27
 33-2450-10 extension for 33-2450-01
 33-2406-01 extension with quick action chuck
 33-2400-27 HUDSON brace complete
 33-2400-99   33-2450-01 HUDSON brace only
 33-2454-10 LEWIS flat burr 10 mm f. 33-2450-01
 33-2454-12 LEWIS flat burr 12 mm f. 33-2450-01
 33-2454-15 LEWIS flat burr 15 mm f. 33-2450-01
 33-2408-00 McKENZIE cutter for 33-2400-27
 33-2412-13 McKENZIE drill 13 mm
 33-2456-11 spheric.burr 11 mm f. 33-2450-01
 33-2456-13 spheric.burr 13 mm f. 33-2450-01
 33-2456-16 spheric.burr 16 mm f. 33-2450-01
 33-2402-09 spheric.burr 9,0mm f. 33-2400-27
 33-2402-14 spheric.burr14,0mm f. 33-2400-27
 33-2402-16 spheric.burr16,0mm f. 33-2400-27
 33-2402-22 spheric.burr22,0mm f. 33-2400-27
 33-2410-02 twist drill 2,0 mm


 33-2600-00 hand drill with telesc. guide
 33-2900-99 key for three-jaws-chuck for 33-2900-00
 33-2500-00 KIRSCHNER drill w. wire guide
 33-2460-16 McKENZIE cutter 16 mm for 33-2450-01
 33-2462-00 McKENZIE drill for 33-2450-01
 33-2458-11 spheric.burr 11 mm f. 33-2450-01
 33-2458-13 spheric.burr 13 mm f. 33-2450-01
 33-2458-16 spheric.burr 16 mm f. 33-2450-01
 33-2458-19 spheric.burr 19 mm f. 33-2450-01
 33-2458-22 spheric.burr 22 mm f. 33-2450-01
 33-2502-00 telescopic wire guide only


 33-2900-00 bone hand drill w.Jacobs chuck
 33-2700-00 BUNNELL bone hand drill 16 cm
 33-2910-00 drilling chuck cannulated may be tightened by hand for shanks up to 6,35 mm length 125 mm
 33-2906-00 handle with Jacobs chuck
 33-2810-00 RALK bone hand drill cap. 6,35 long shaft
 33-2800-00 RALK bone hand drill cap. 6,35 mm
 33-2602-00 wire guide telescopic only


 33-3506-20 drill bit 100 75 mm 2,0 mm AO
 33-3506-27 drill bit 100/ 75 mm 2,7mm AO
 33-3506-25 drill bit 110/ 85mm 2,5mm AO
 33-3506-35 drill bit 110/ 85mm 3,5mm AO
 33-3507-27 drill bit 125/100 mm 2,7mm AO
 33-3507-20 drill bit 125/100mm 2,0mm AO
 33-3506-32 drill bit 145/120mm 3,2mm AO
 33-3506-45 drill bit 145/120mm 4,5mm AO
 33-3507-32 drill bit 195/170mm 3,2mm AO
 33-3507-35 drill bit 195/170mm 3,5mm AO
 33-3507-45 drill bit 195/170mm 4,5mm AO
 33-3506-60 drill bit 195/170mm 6,0mm AO
 33-3506-11 drill bit 60/ 35 mm 1,1 mm AO
 33-3506-15 drill bit 85/ 60 mm 1,5 mm AO
 33-3507-15 drill bit 110/ 85 mm 1,5 mm AO
 33-3505-32 tw. drill 180/165mm cyl. 3,2mm
 33-3505-35 tw. drill 180/165mm cyl. 3,5mm
 33-3505-45 tw. drill 180/165mm cyl. 4,5mm
 33-3504-10 twist drill cylindrical 1,0 mm
 33-3504-15 twist drill cylindrical 1,5 mm 70/40 mm
 33-3504-20 twist drill cylindrical 2,0 mm
 33-3504-25 twist drill cylindrical 2,5 mm 95/45 mm
 33-3504-28 twist drill cylindrical 2,8 mm 100/45 mm
 33-3504-30 twist drill cylindrical 3,0 mm
 33-3504-32 twist drill cylindrical 3,2 mm 115/45 mm
 33-3504-35 twist drill cylindrical 3,5 mm 110/25mm
 33-3504-40 twist drill cylindrical 4,0 mm
 33-3504-45 twist drill cylindrical 4,5 mm
 33-3504-50 twist drill cylindrical 5,0 mm
 33-3504-60 twist drill cylindrical 6,0 mm
 33-3500-20 twist drill long 2,0 mm Borch.
 33-3500-25 twist drill long 2,5 mm Borch.
 33-3500-30 twist drill long 3,0 mm Borch.
 33-3500-32 twist drill long 3,2 mm Borch.
 33-3500-35 twist drill long 3,5 mm Borch.
 33-3500-40 twist drill long 4,0 mm Borch.
 33-3500-50 twist drill long 5,0 mm Borch.
 33-3500-60 twist drill long 6,0 mm Borch.
 33-3500-70 twist drill long 7,0 mm Borch.
 33-3502-10 twist drill short 1,0 mmBorch.
 33-3502-12 twist drill short 1,2 mmBorch.
 33-3502-15 twist drill short 1,5 mmBorch.
 33-3502-18 twist drill short 1,8 mmBorch.
 33-3502-20 twist drill short 2,0 mmBorch.
 33-3502-22 twist drill short 2,2 mmBorch.
 33-3502-25 twist drill short 2,5 mmBorch.
 33-3502-28 twist drill short 2,8 mmBorch.
 33-3502-30 twist drill short 3,0 mmBorch.
 33-3502-32 twist drill short 3,2 mmBorch.
 33-3502-35 twist drill short 3,5 mmBorch.
 33-3502-40 twist drill short 4,0 mmBorch.
 33-3502-50 twist drill short 5,0 mmBorch.


 33-3524-00 handle with dental coupling
 33-3522-00 handle with quick coupling
 33-3518-00 T tap handle for AO/ASIF shaft long non cannulated
 33-3520-00 T tap handle for AO/ASIF shaft short non cannulated
 33-3510-15 tap 1,5 mm
 33-3510-20 tap 2,0 mm
 33-3511-20 tap 2,0 mm extra long
 33-3510-27 tap 2,7 mm
 33-3511-27 tap 2,7 mm extra long
 33-3514-27 tap 2,7 mm with T bar handle
 33-3512-35 tap 3,5 mm cancellous
 33-3510-35 tap 3,5 mm corticalis
 33-3514-35   33-3515-35 tap 3,5 mm with T bar handle
 33-3514-40 tap 4,0 mm with T bar handle
 33-3512-45 tap 4,5 mm extra long
 33-3511-45 tap 4,5 mm long
 33-3510-45 tap 4,5 mm short
 33-3515-45 tap 4,5 mm with T bar handle
 33-3510-65 tap 6,5 mm
 33-3514-65 tap 6,5 mm with T bar handle


 33-3702-08 ALBEE burr olive shape 8 mm
 33-3702-10 ALBEE burr olive shape 10 mm
 33-3702-12 ALBEE burr olive shape 12 mm
 33-3704-07 ALBEE burr pointed 7 mm
 33-3707-25 bone drill flat 25 mm diameter
 33-3706-13 BORCHARDT burr olive shape13mm
 33-3804-20 circular saw blade only 20 mm
 33-3804-25 circular saw blade only 25 mm
 33-3804-30 circular saw blade only 30 mm
 33-3804-35 circular saw blade only 35 mm
 33-3804-40 circular saw blade only 40 mm
 33-3804-45 circular saw blade only 45 mm
 33-3804-50 circular saw blade only 50 mm
 33-3802-20 circular saw double 20 mm diam
 33-3802-25 circular saw double 25 mm diam
 33-3802-30 circular saw double 30 mm diam
 33-3802-35 circular saw double 35 mm diam
 33-3802-40 circular saw double 40 mm diam
 33-3802-45 circular saw double 45 mm diam
 33-3802-50 circular saw double 50 mm diam
 33-3800-20 circular saw single 20 mm diam
 33-3800-25 circular saw single 25 mm diam
 33-3800-30 circular saw single 30 mm diam
 33-3800-35 circular saw single 35 mm diam
 33-3800-40 circular saw single 40 mm diam
 33-3800-45 circular saw single 45 mm diam
 33-3800-50 circular saw single 50 mm diam
 33-3608-08 conical burr 8 mm
 33-3608-10 conical burr 10 mm
 33-3806-17 disc to limit cut depth 17 mm
 33-3806-22 disc to limit cut depth 22 mm
 33-3806-27 disc to limit cut depth 27 mm
 33-3806-32 disc to limit cut depth 32 mm
 33-3806-37 disc to limit cut depth 37 mm
 33-3806-42 disc to limit cut depth 42 mm
 33-3806-47 disc to limit cut depth 47 mm
 33-3606-12 DOYEN conical burr 12 mm
 33-3700-12 DOYEN cylindrical burr 12 mm
 33-3700-15 DOYEN cylindrical burr 15 mm
 33-3602-04 DOYEN spherical burr long 4mm
 33-3602-06 DOYEN spherical burr long 6mm
 33-3602-08 DOYEN spherical burr long 8mm
 33-3602-10 DOYEN spherical burr long 10mm
 33-3602-12 DOYEN spherical burr long 12mm
 33-3602-14 DOYEN spherical burr long 14mm
 33-3602-16 DOYEN spherical burr long 16mm
 33-3604-04 DOYEN spherical burr short 4mm
 33-3604-06 DOYEN spherical burr short 6mm
 33-3604-08 DOYEN spherical burr short 8mm
 33-3604-10 DOYEN spherical burr short10mm
 33-3604-12 DOYEN spherical burr short12mm
 33-3604-14 DOYEN spherical burr short14mm
 33-3604-16 DOYEN spherical burr short16mm
 33-3808-00 set = 2 wrenches
 33-3708-08 TOTI drill 8 mm diameter


 33-3914-03 bone perforator 3x3 mm 18 cm
 33-3916-03 bone perforator 3x3 mm 25 cm
 33-3914-04 bone perforator 4x4 mm 18 cm
 33-3916-04 bone perforator 4x4 mm 25 cm
 33-3914-05 bone perforator 5x5 mm 18 cm
 33-3916-05 bone perforator 5x5 mm 25 cm
 33-3914-06 bone perforator 6x6 mm 18 cm
 33-3916-06 bone perforator 6x6 mm 25 cm
 33-3914-08 bone perforator 8x8 mm 18 cm
 33-3916-08 bone perforator 8x8 mm 25 cm
 33-3914-10 bone perforator 10x10 mm 18 cm
 33-3916-10 bone perforator 10x10 mm 25 cm
 33-3904-14 bone perforator square 14 cm
 33-3900-23 extractor for femoral head 23 cm
 33-3908-16 ISSELIN bone awl 16,5 cm
 33-3910-16 ISSELIN bone awl 16,5 cm with eye
 33-3905-21   33-3906-21 PERTHES reamer square 21 cm
 33-3912-02 reamer square hollow hdle. 2 mm 16,5 cm
 33-3912-03 reamer square hollow hdle. 3 mm 16,5 cm
 33-3902-14 reamer square hollow hdle.14cm


 33-3918-10 bone perforator 10x10 mm 30 cm
 33-3918-03 bone perforator 3x3 mm 30 cm
 33-3918-04 bone perforator 4x4 mm 30 cm
 33-3918-05 bone perforator 5x5 mm 30 cm
 33-3918-06 bone perforator 6x6 mm 30 cm
 33-3918-08 bone perforator 8x8 mm 30 cm
 33-4030-16 KIRSCHNER wiredrill threaded 5 mm length 150 mm diam. 1,6 mm
 33-4032-16 KIRSCHNER wiredrill threaded 15 mm length 150 mm diam. 1,6 mm
 33-4034-20 KIRSCHNER wiredrill threaded 15 mm length 150 mm diam. 2,0 mm
 33-4036-20 KIRSCHNER wiredrill threaded 15 mm length 200 mm diam. 2,0 mm
 33-4038-20 KIRSCHNER wiredrill threaded 15 mm length 200 mm diam. 2,5 mm
 33-4038-23 KIRSCHNER wiredrill threaded 20 mm length 230 mm diam. 2,5 mm
 33-4010-08 KIRSCHNER wiredrill trocar point/round length 70 mm d = 0,8 mm
 33-4010-10 KIRSCHNER wiredrill trocar point/round length 70 mm d = 1,0 mm
 33-4010-15 KIRSCHNER wiredrill trocar point/round length 70 mm d = 1,5 mm
 33-4010-25 KIRSCHNER wiredrill trocar point/round length 70 mm d = 2,5 mm
 33-4012-08 KIRSCHNER wiredrill trocar point/round length 150 mm d = 0,8 mm
 33-4012-09 KIRSCHNER wiredrill trocar point/round length 150 mm d = 0,9 mm
 33-4012-10 KIRSCHNER wiredrill trocar point/round length 150 mm d = 1,0 mm
 33-4012-12 KIRSCHNER wiredrill trocar point/round length 150 mm d = 1,2 mm
 33-4012-13 KIRSCHNER wiredrill trocar point/round length 150 mm d = 1,3 mm
 33-4012-14 KIRSCHNER wiredrill trocar point/round length 150 mm d = 1,4 mm
 33-4012-15 KIRSCHNER wiredrill trocar point/round length 150 mm d = 1,5 mm
 33-4012-16 KIRSCHNER wiredrill trocar point/round length 150 mm d = 1,6 mm
 33-4012-18 KIRSCHNER wiredrill trocar point/round length 150 mm d = 1,8 mm
 33-4012-20 KIRSCHNER wiredrill trocar point/round length 150 mm d = 2,0 mm
 33-4012-22 KIRSCHNER wiredrill trocar point/round length 150 mm d = 2,2 mm
 33-4012-25 KIRSCHNER wiredrill trocar point/round length 150 mm d = 2,5 mm
 33-4012-30 KIRSCHNER wiredrill trocar point/round length 150 mm d = 3,0 mm
 33-4020-08 KIRSCHNER wiredrill trocar point/round length 310 mm d = 0,8 mm
 33-4020-09 KIRSCHNER wiredrill trocar point/round length 310 mm d = 0,9 mm
 33-4020-10 KIRSCHNER wiredrill trocar point/round length 310 mm d = 1,0 mm
 33-4020-12 KIRSCHNER wiredrill trocar point/round length 310 mm d = 1,2 mm
 33-4020-13 KIRSCHNER wiredrill trocar point/round length 310 mm d = 1,3 mm
 33-4020-14 KIRSCHNER wiredrill trocar point/round length 310 mm d = 1,4 mm
 33-4020-15 KIRSCHNER wiredrill trocar point/round length 310 mm d = 1,5 mm
 33-4020-16 KIRSCHNER wiredrill trocar point/round length 310 mm d = 1,6 mm
 33-4020-18 KIRSCHNER wiredrill trocar point/round length 310 mm d = 1,8 mm
 33-4020-20 KIRSCHNER wiredrill trocar point/round length 310 mm d = 2,0 mm
 33-4020-22 KIRSCHNER wiredrill trocar point/round length 310 mm d = 2,2 mm
 33-4020-25 KIRSCHNER wiredrill trocar point/round length 310 mm d = 2,5 mm
 33-4020-30 KIRSCHNER wiredrill trocar point/round length 310 mm d = 3,0 mm
 33-4022-08 KIRSCHNER wiredrill trocar/trocar points length 150 mm d = 0,8 mm
 33-4022-10 KIRSCHNER wiredrill trocar/trocar points length 150 mm d = 1,0 mm
 33-4022-12 KIRSCHNER wiredrill trocar/trocar points length 150 mm d = 1,2 mm
 33-4022-14 KIRSCHNER wiredrill trocar/trocar points length 150 mm d = 1,4 mm
 33-4022-15 KIRSCHNER wiredrill trocar/trocar points length 150 mm d = 1,5 mm
 33-4022-16 KIRSCHNER wiredrill trocar/trocar points length 150 mm d = 1,6 mm
 33-4022-18 KIRSCHNER wiredrill trocar/trocar points length 150 mm d = 1,8 mm
 33-4022-20 KIRSCHNER wiredrill trocar/trocar points length 150 mm d = 2,0 mm
 33-4022-22 KIRSCHNER wiredrill trocar/trocar points length 150 mm d = 2,2 mm
 33-4022-25 KIRSCHNER wiredrill trocar/trocar points length 150 mm d = 2,5 mm
 33-4024-08 KIRSCHNER wiredrill trocar/trocar points length 310 mm d = 0,8 mm
 33-4024-10 KIRSCHNER wiredrill trocar/trocar points length 310 mm d = 1,0 mm
 33-4024-12 KIRSCHNER wiredrill trocar/trocar points length 310 mm d = 1,2 mm
 33-4024-14 KIRSCHNER wiredrill trocar/trocar points length 310 mm d = 1,4 mm
 33-4024-15 KIRSCHNER wiredrill trocar/trocar points length 310 mm d = 1,5 mm
 33-4024-16 KIRSCHNER wiredrill trocar/trocar points length 310 mm d = 1,6 mm
 33-4024-18 KIRSCHNER wiredrill trocar/trocar points length 310 mm d = 1,8 mm
 33-4024-20 KIRSCHNER wiredrill trocar/trocar points length 310 mm d = 2,0 mm
 33-4024-22 KIRSCHNER wiredrill trocar/trocar points length 310 mm d = 2,2 mm
 33-4024-25 KIRSCHNER wiredrill trocar/trocar points length 310 mm d = 2,5 mm
 33-3922-03 OMBREDANNE bone perforator 3x3 mm 25 cm
 33-3920-03 OMBREDANNE bone perforator 3x3 mm18,5 cm
 33-3922-04 OMBREDANNE bone perforator 4x4 mm 25 cm
 33-3920-04 OMBREDANNE bone perforator 4x4 mm18,5 cm
 33-3922-05 OMBREDANNE bone perforator 5x5 mm 25 cm
 33-3920-05 OMBREDANNE bone perforator 5x5 mm18,5 cm
 33-3922-06 OMBREDANNE bone perforator 6x6 mm 25 cm
 33-3920-06 OMBREDANNE bone perforator 6x6 mm18,5 cm


 33-4038-90 measuring gauge for wire drills (Kirschner) 0,6 to 3,0 mm not calibrate
 33-4039-12 STEINMANN pin 3,5 mm diam.length 12 cm trocar tip triangular end
 33-4039-15 STEINMANN pin 3,5 mm diam.length 15 cm trocar tip triangular end
 33-4039-18 STEINMANN pin 3,5 mm diam.length 18 cm trocar tip triangular end
 33-4039-20 STEINMANN pin 3,5 mm diam.length 20 cm trocar tip triangular end
 33-4039-25 STEINMANN pin 3,5 mm diam.length 25 cm trocar tip triangular end
 33-4039-30 STEINMANN pin 3,5 mm diam.length 30 cm trocar tip triangular end
 33-4040-12 STEINMANN pin 4,0 mm diam.length 12 cm trocar tip triangular end
 33-4040-15 STEINMANN pin 4,0 mm diam.length 15 cm trocar tip triangular end
 33-4040-18 STEINMANN pin 4,0 mm diam.length 18 cm trocar tip triangular end
 33-4040-20 STEINMANN pin 4,0 mm diam.length 20 cm trocar tip triangular end
 33-4040-25 STEINMANN pin 4,0 mm diam.length 25 cm trocar tip triangular end
 33-4040-30 STEINMANN pin 4,0 mm diam.length 30 cm trocar tip triangular end
 33-4045-12 STEINMANN pin 4,5 mm diam.length 12 cm trocar tip triangular end
 33-4045-15 STEINMANN pin 4,5 mm diam.length 15 cm trocar tip triangular end
 33-4045-18 STEINMANN pin 4,5 mm diam.length 18 cm trocar tip triangular end
 33-4045-20 STEINMANN pin 4,5 mm diam.length 20 cm trocar tip triangular end
 33-4045-25 STEINMANN pin 4,5 mm diam.length 25 cm trocar tip triangular end
 33-4045-30 STEINMANN pin 4,5 mm diam.length 30 cm trocar tip triangular end
 33-4050-12 STEINMANN pin 5,0 mm diam.length 12 cm trocar tip triangular end
 33-4050-15 STEINMANN pin 5,0 mm diam.length 15 cm trocar tip triangular end
 33-4050-18 STEINMANN pin 5,0 mm diam.length 18 cm trocar tip triangular end
 33-4050-20 STEINMANN pin 5,0 mm diam.length 20 cm trocar tip triangular end
 33-4050-25 STEINMANN pin 5,0 mm diam.length 25 cm trocar tip triangular end
 33-4050-30 STEINMANN pin 5,0 mm diam.length 30 cm trocar tip triangular end
 33-4130-15 STEINMANN pin with thread 15cm/3,0mm trocar tip triangular shaft with central thread
 33-4135-15 STEINMANN pin with thread 15cm/3,5mm trocar tip triangular shaft with central thread
 33-4140-15 STEINMANN pin with thread 15cm/4,0mm trocar tip triangular shaft with central thread
 33-4145-15 STEINMANN pin with thread 15cm/4,5mm trocar tip triangular shaft with central thread
 33-4150-15 STEINMANN pin with thread 15cm/5,0mm trocar tip triangular shaft with central thread
 33-4130-18 STEINMANN pin with thread 18cm/3,0mm trocar tip triangular shaft with central thread
 33-4135-18 STEINMANN pin with thread 18cm/3,5mm trocar tip triangular shaft with central thread
 33-4140-18 STEINMANN pin with thread 18cm/4,0mm trocar tip triangular shaft with central thread
 33-4145-18 STEINMANN pin with thread 18cm/4,5mm trocar tip triangular shaft with central thread
 33-4150-18 STEINMANN pin with thread 18cm/5,0mm trocar tip triangular shaft with central thread
 33-4130-20 STEINMANN pin with thread 20cm/3,0mm trocar tip triangular shaft with central thread
 33-4135-20 STEINMANN pin with thread 20cm/3,5mm trocar tip triangular shaft with central thread
 33-4140-20 STEINMANN pin with thread 20cm/4,0mm trocar tip triangular shaft with central thread
 33-4145-20 STEINMANN pin with thread 20cm/4,5mm trocar tip triangular shaft with central thread
 33-4150-20 STEINMANN pin with thread 20cm/5,0mm trocar tip triangular shaft with central thread
 33-4130-23 STEINMANN pin with thread 23cm/3,0mm trocar tip triangular shaft with central thread
 33-4135-23 STEINMANN pin with thread 23cm/3,5mm trocar tip triangular shaft with central thread
 33-4140-23 STEINMANN pin with thread 23cm/4,0mm trocar tip triangular shaft with central thread
 33-4145-23 STEINMANN pin with thread 23cm/4,5mm trocar tip triangular shaft with central thread
 33-4150-23 STEINMANN pin with thread 23cm/5,0mm trocar tip triangular shaft with central thread
 33-4140-25 STEINMANN pin with thread 25cm/4,0mm trocar tip triangular shaft with central thread
 33-4145-25 STEINMANN pin with thread 25cm/4,5mm trocar tip triangular shaft with central thread
 33-4150-25 STEINMANN pin with thread 25cm/5,0mm trocar tip triangular shaft with central thread
 33-4145-30 STEINMANN pin with thread 30cm/4,5mm trocar tip triangular shaft with central thread
 33-4150-30 STEINMANN pin with thread 30cm/5,0mm trocar tip triangular shaft with central thread
 33-4159-97 STEINMANN tip protector 3,0 mm 5 ea
 33-4159-98 STEINMANN tip protector 4,0 mm 5 ea
 33-4159-99 STEINMANN tip protector 5,0 mm 5 ea.


 33-5002-16 BOEHLER extension bow 16x9 cm
 33-5002-21 BOEHLER extension bow 21x11 cm
 33-5002-22 BOEHLER extension bow 21x15 cm
 33-5104-18 extension bow 18 x 10 cm
 33-5104-27 extension bow 27 x 16 cm
 33-5104-99 extension hooks
 33-5109-02 extension hooks large
 33-5109-01 extension hooks small
 33-5204-01 finger ext. sleeve bast size 1
 33-5204-02 finger ext. sleeve bast size 2
 33-5204-03 finger ext. sleeve bast size 3
 33-5204-04 finger ext. sleeve bast size 4
 33-5204-05 finger ext. sleeve bast size 5
 33-5204-06 finger ext. sleeve bast size 6
 33-5202-01 finger ext. sleeve wire size 1
 33-5202-02 finger ext. sleeve wire size 2
 33-5202-03 finger ext. sleeve wire size 3
 33-5102-06 KIRSCHNER bow 6,0 x 5 cm
 33-5102-09 KIRSCHNER bow 9,5 x 7 cm
 33-5102-11 KIRSCHNER bow 9,5 x 11 cm
 33-5102-10 KIRSCHNER bow 10,5 x 10,5 cm
 33-5102-12 KIRSCHNER bow 12,0 x 12,0 cm
 33-5102-13 KIRSCHNER bow 13,5 x 13 cm
 33-5102-15 KIRSCHNER bow 15,5 x 15,5 cm
 33-5102-20 KIRSCHNER bow 20,0 x 15,5 cm
 33-5108-03 KIRSCHNER bow Americ.extr.lrg.
 33-5108-02 KIRSCHNER bow American large
 33-5108-01 KIRSCHNER bow American small
 33-5105-02 tightener for 33.512.--
 33-5105-01 wrench for 33.512.--


 33-5263-24 cerclage needle 240 mm curved
 33-5263-27 cerclage needle 270 mm curved
 33-5262-17 DANIS wire guide 17,5 cm
 33-5262-19 DANIS wire guide 19,0 cm
 33-5262-21 DANIS wire guide 21,0 cm
 33-5258-20 DANIS wire tension pliers 20 cm
 33-5250-01 DEMEL wire conductor fig. 1
 33-5250-02 DEMEL wire conductor fig. 2
 33-5250-03 DEMEL wire conductor fig. 3
 33-5254-28 DEMEL wire tightener
 33-5260-45 wire guide 45 mm
 33-5260-70 wire guide 70 mm handle made of PTFE


 33-5300-02 bone wire soft 10 m 0,2 mm
 33-5300-03 bone wire soft 10 m 0,3 mm
 33-5300-04 bone wire soft 10 m 0,4 mm
 33-5300-05 bone wire soft 10 m 0,5 mm
 33-5300-06 bone wire soft 10 m 0,6 mm
 33-5300-07 bone wire soft 10 m 0,7 mm
 33-5300-08 bone wire soft 10 m 0,8 mm
 33-5300-09 bone wire soft 10 m 0,9 mm
 33-5300-10 bone wire soft 10 m 1,0 mm
 33-5300-11 bone wire soft 10 m 1,1 mm
 33-5300-12 bone wire soft 10 m 1,2 mm
 33-5300-15 bone wire soft 10 m 1,5 mm
 33-5291-08 bone wire with eye 0,8 mm / 28 cm
 33-5291-10 bone wire with eye 1,0 mm / 28 cm
 33-5292-10 bone wire with eye 1,0 mm / 60 cm
 33-5291-12 bone wire with eye 1,2 mm / 28 cm
 33-5292-12 bone wire with eye 1,2 mm / 60 cm
 33-5301-21 LOUTE wire tightener/twister


 33-5305-13   33-5305-18 extract.forceps f. wire drills
 33-5307-02   33-5307-03   33-5307-04 extract.forceps f. wiredrills
 33-5306-19 flat n.pliers serr.,taper 19cm
 33-5306-14 flat nose pliers 14 cm
 33-5302-17 flat nose pliers parall. 17 cm
 33-5303-18 grip (seizing) forceps 18 cm
 33-5307-01 round nose pliers dbl.art.18cm
 33-5304-15 wire cutting and bending forc.


 33-5308-02 flat n.pliers cross serra.17cm
 33-5309-20 flat nose pliers 20 cm slip joint adjustable
 33-5314-14 flat nose pliers one jaw serrated
 33-5308-01 flat nose pliers serrated 17cm
 33-5310-16 HACKSTOCK flat nose pliers
 33-5312-14 MARBURG flat nose pliers serrated jaws
 33-5315-14 wire twisting forceps 14 cm TC
 33-5316-15 wire twisting forceps TC 15 cm
 33-5316-18 wire twisting forceps TC 18 cm


 33-5318-18 flat nose pliers parall.+cutt.
 33-5322-18 forceps wire twisting 18,5 cm TC
 33-5319-30 needle nose locking pliers 7 mm jaw width length 30 cm
 33-5319-22 needle nose locking pliers jaw width length 22 cm
 33-5319-25 needle nose locking pliers jaw width length 25 cm
 33-5320-14 wire twisting forceps 14 cm TC
 33-5319-15 wire twisting forceps 15 cm TC
 33-5320-15   33-5320-20 wire twisting forceps TC
 33-5321-15   33-5323-15 wire twisting forceps TC 15 cm
 33-5323-18 wire twisting forceps TC 18 cm


 33-5330-14 extract.forceps f. wiredrills 14,5 cm
 33-5326-18   33-5328-18 flat nose pliers compound act. with parallel action
 33-5324-01 flat nose pliers No. 1 TC
 33-5324-02 flat nose pliers No. 2 TC
 33-5324-03 flat nose pliers No. 3 TC
 33-5360-14 wire cutter cutting laterally 14 cm TC
 33-5362-23 wire cutter heavy duty 23 cm


 33-5400-16 Diamant wire cutter 16 cm
 33-5405-18 plate cutter TC jaws 18 cm
 33-5405-22 wire cutter doubl.art.22 cm TC
 33-5402-15 wire cutter doubl.artic. 15 cm
 33-5401-22 wire cutting forceps compound


 33-5407-17 REILL wire cutting forceps 17,5 cm TC
 33-5415-16 wire cutter cap. 2 mm 16,5 cm
 33-5406-18 wire cutting forceps 18 cm
 33-5408-23 wire cutting forceps 23,5cm TC
 33-5409-23 wire cutting forceps 23,5cm TC angled 45°


 33-5506-48   33-5506-56 cutter,wire and nails,cap.6 mm
 33-5508-48 cutter,wire and nails,cap.6 mm TC
 33-5500-18 end cutter cannulated
 33-5502-17 forceps wire hold. lat.jaws TC 17 cm
 33-5701-12 KUENTSCHER med.reamer 26cm 12,5mm
 33-5701-08 KUENTSCHER med.reamer 26cm 8mm
 33-5701-10 KUENTSCHER med.reamer 26cm10mm
 33-5703-35 KUENTSCHER reamer femur 35 cm
 33-5602-24 nail impact./extractor 2,4 mm
 33-5602-32 nail impact./extractor 3,2 mm
 33-5602-48 nail impact./extractor 4,8 mm
 33-5602-64 nail impact./extractor 6,4 mm
 33-5600-24 reamer f. intramed. pins 2,4mm
 33-5600-32 reamer f. intramed. pins 3,2mm
 33-5600-48 reamer f. intramed. pins 4,8mm
 33-5600-64 reamer f. intramed. pins 6,4mm
 33-5505-24 wire cutter (side cutter) TC


 33-5900-01   33-5900-02 extraction hook 1 prong
 33-5906-29 extraction hook 29 cm
 33-5906-37 extraction hook 37 cm
 33-5906-42 extraction hook 42 cm
 33-5906-49 extraction hook 49 cm
 33-5801-35 guide pin 35 cm x 2,5 mm
 33-5802-35 guide pin 35 cm x 3,0 mm
 33-5803-35 guide pin 35 cm x 3,5 mm
 33-5804-35 guide pin 35 cm x 4,0 mm
 33-5805-35 guide pin 35 cm x 5,0 mm
 33-5801-46 guide pin 46 cm x 2,5 mm
 33-5802-46 guide pin 46 cm x 3,0 mm
 33-5803-46 guide pin 46 cm x 3,5 mm
 33-5804-46 guide pin 46 cm x 4,0 mm
 33-5805-46 guide pin 46 cm x 5,0 mm
 33-5802-60 guide pin 60 cm x 3,0 mm
 33-5803-60 guide pin 60 cm x 3,5 mm
 33-5804-60 guide pin 60 cm x 4,0 mm
 33-5805-60 guide pin 60 cm x 5,0 mm
 33-5900-00 KUENTSCHER extractor w. 2 hooks
 33-5807-21 KUENTSCHER nail driver 13 - 20 mm
 33-5806-21 KUENTSCHER nail driver 21 cm
 33-5807-13 KUENTSCHER nail driver 6 - 8 mm
 33-5807-17 KUENTSCHER nail driver 9 - 12 mm
 33-6002-20 LLOYD impactor/extractor 20 cm
 33-5908-30 slotted hammer 30 cm f.extr.h.


 33-6302-25 LANE screwdriv.25cm cross slot
 33-6212-25 PHILLIPS screw driver
 33-6214-17 screw driver 17 cm
 33-6214-25 screw driver 25 cm
 33-6208-15 screw driver hexagon. 1,5 mm
 33-6208-25 screw driver hexagon. 2,5 mm
 33-6208-35 screw driver hexagon. 3,5 mm
 33-6300-15 screwdriver 1,5mm w.scr.holder
 33-6300-25 screwdriver 2,5mm w.scr.holder
 33-6259-15 screwdriwer insert hex. 1,5 mm
 33-6259-25 screwdriwer insert hex. 2,5 mm
 33-6259-35 screwdriwer insert hex. 3,5 mm
 33-6204-24 WILLIAMS screw driver/holder


 33-6500-14 bending forceps f.small plates
 33-6402-00   33-6403-01   33-6403-02 bending iron f.small bone plat
 33-6405-00 bending iron f.standard plates
 33-6498-14 bending pliers for bone plates
 33-6350-08 forceps screw holding
 33-6303-13 holding forceps f.small plates
 33-6309-22 LANE forceps for bone plates
 33-6305-18   33-6307-23 LANE forceps for bone screws


 33-6502-22 bend.fcps.f.2,7 + 3,5 mm plates
 33-6700-00 bending device for bone plates
 33-6503-25 bending pliers f.straight plts
 33-6704-20 bending template f.12hole200mm for standard bone paltes
 33-6704-09 bending template f.5 hole 90mm for standard bone plates
 33-6706-06 bending template f.7 hole 60mm for small fragment plates
 33-6704-12 bending template f.7hole 120mm for standard bone plates
 33-6706-08 bending template f.9 hole 85mm for small fragment plates
 33-6704-15 bending template f.9hole 150mm for standard bone plates
 33-7900-27 drill bit cannulated 2,7mm length 160mm canulation 1,35 mm
 33-7900-32 drill bit cannulated 3,2mm length 160mm canulation 1,75 mm
 33-7900-35 drill bit cannulated 3,5mm length 160mm canulation 1,35 mm
 33-7900-45 drill bit cannulated 4,5mm length 160mm canulation 2,0 mm
 33-7900-50 drill bit cannulated 5,0mm length
 33-7910-27 tap and drill sleeve small 2,7/1,0 mm for small cannulated screws




 33-8206-45 countersink large 4,5 mm
 33-8204-32 countersink malleol. 3,2 mm
 33-8201-11 countersink mini 1,1 mm
 33-8202-20 countersink small 2,0 mm
 33-8192-00 parallel aiming device for wires 2,0 mm
 33-8200-00 tissue protector f.cann.screws


 33-8402-20 clip to hold plates 2,0 mm
 33-8402-27 clip to hold plates 2,7 mm
 33-8402-35 clip to hold plates 3,5 mm
 33-8207-01 depth gauge f.mini screws long not calibrated
 33-8209-01 depth gauge for large screws not calibrated
 33-8207-00 depth gauge for mini screws not calibrated
 33-8208-00   33-8208-01 depth gauge for small screws not calibrated
 33-8702-20 drill guide and sleeve 2 mm
 33-8704-27 drill sleeve 2,7/2,0 mm
 33-8704-35 drill sleeve 3,5/2,5 mm
 33-8704-45 drill sleeve 4,5/3,2 mm
 33-8700-15 drill sleeve mini 1,1 + 1,5 mm
 33-8700-20 drill sleeve mini 1,5 + 2,0 mm
 33-8300-00 gauge for drillbits and screws not calibrated
 33-8410-00 hooklet sharp for checking alignment of fracture ends and for removing in-grown tissue in screw heads


 33-8800-35 aiming dev.small w.thrd.3,5 mm
 33-8800-45 aiming device w. thread 3,5 m
 33-8801-45 aiming device with tip
 33-8803-45 drill sleeve 4,5/3,2 mm
 33-8807-27 tissue protector + tap sleeve 2,7 mm / 2,0 mm
 33-8807-35 tissue protector + tap sleeve 3,5 / 2,5 mm
 33-8805-35 tissue protector 3,5 mm
 33-8809-45 tissue protector 4,5 mm


Medical Specialization:

Bone Surgery
Traumatology

Catalog page: 34

 34-1010-45 drill guide double 4,5/3,2 mm for 4,5 mm screws and drill bits 4,5 and 3,2 mm
 34-1012-65 drill guide double 6,5/3,2 mm for 6,5 mm screws and drill bits 3,2 mm
 34-1005-40 drill sleeve f.rd.hole pl.40mm
 34-1005-60 drill sleeve f.rd.hole pl.60mm
 34-1002-32 drill sleeve f.tension device
 34-1014-35 universal drill guide 3,5 mm for neutral and compression positioning for drill bit 2,5 mm
 34-1016-45 universal drill guide 4,5/3,2 mm for neutral and compression positioning for drill bit 3,2 and 4,5 mm


 34-1105-11 cardanic wrench 11 mm
 34-1101-99 pin wrench diam. 4,5 mm long 120 mm for tension device and distractor
 34-1100-08 tension device span 8 mm
 34-1101-16 tension device stroke 20 mm
 34-1106-11 wrench 11 mm


 34-2100-13 aiming device w.attach.f.ang.p
 34-1207-45 drill guide 40mm neutr./eccent
 34-1209-60 drill guide hip 60mm neut./ecc
 34-1205-20 drill sleeve 2,0 mm
 34-1205-27 drill sleeve 2,7 mm
 34-1205-35 drill sleeve 3,5 mm
 34-2304-22 final impactor
 34-2302-15 impactor and extractor
 34-2102-02 reamer f.quick-action chuck
 34-2302-13 seating chisel f. angled plate
 34-2104-00 sliding guide f.seating chisel
 34-2304-20 slotted hammer


 34-2310-02 inserter for angular blades for adolescents and childred
 34-2313-03 position.plate triangular 100/60/20° adult size not calibrated
 34-2313-02 position.plate triangular 80/70/30° adult size not calibrated
 34-2313-01 position.plate triangular 90/50/40° adult size not calibrated
 34-2306-07 seating chisel angl.plates 'T' child size
 34-2308-17 seating chisel angl.plates 'T' for small adults and acolescents


 34-2313-20 condylar plate guide not calibrated
 34-3307-03 drill guide 135/140/145/150deg for 3 guide wires not calibrated
 34-3307-00 drill guide 135/140/145/150deg not calibrated
 34-2313-07 position.plate triangular 80/70/30° child size not calibrated
 34-2313-06 position.plate triangular 90/50/40° child size not calibrated
 34-2313-08 position.plate triangular 100/60/20° child size not calibrated
 34-2313-10   34-2313-16 positioning plate 110/90/90/70° quadrangular for varisation osteotomy adult size not calibrated


 34-3308-01 angle guide 135° f. hip screws not calibrated
 34-3308-02 angle guide 140° f. hip screws not calibrated
 34-3308-03 angle guide 145° f. hip screws not calibrated
 34-3308-04 angle guide 150° f. hip screws not calibrated
 34-3308-05 direct measuring dev. for DHS not calibrated
 34-3308-00 guide pin DHS 2,5/230mm w.thr. not calibrated
 34-3308-14 impactor for DHS screws
 34-3308-08 T-handle w.quick coupl. f. DHS
 34-3308-17 tap for DHS screws 240 mm long
 34-3308-06 wrench for DHS screws


 34-3308-42 angle guide for hip screws
 34-3308-19 centering sleeve f. 34-3308-06DHS
 34-3308-18 centering sleeve f. 34-3308-17DHS
 34-3308-20 coupling screw for DHS screws
 34-3308-22 coupling screw long DHS
 34-3308-21 guide shaft for 34-3308-20DHS
 34-3308-93 reamer triple complt. long DHS
 34-3308-95 reamer triple complt.short DHS


 34-3408-02 guide rod for reamer diam. 2,0 mm with olive 3 mm
 34-3408-03 guide rod for reamer diam. 4,0 mm with olive 4 mm
 34-3414-06 reamer medullary elastic 6 mm
 34-3414-07 reamer medullary elastic 7 mm
 34-3414-08 reamer medullary elastic 8 mm
 34-3414-09 reamer medullary elastic 9 mm
 34-3414-10 reamer medullary elastic 10 mm
 34-3414-11 reamer medullary elastic 11 mm
 34-3414-12 reamer medullary elastic 12 mm
 34-3414-13 reamer medullary elastic 13 mm
 34-3414-14 reamer medullary elastic 14 mm
 34-3414-15 reamer medullary elastic 15 mm
 34-3414-16 reamer medullary elastic 16 mm
 34-3414-17 reamer medullary elastic 17 mm
 34-3414-18 reamer medullary elastic 18 mm
 34-3414-19 reamer medullary elastic 19 mm
 34-3414-20 reamer medullary elastic 20 mm
 34-3402-55 reamer medullary flex. 5,5 mm w. AESCULAP drive connection DIN 58809
 34-3400-55 reamer medullary flex. 5,5 mm with HUDSON drive connection
 34-3402-60 reamer medullary flex. 6,0 mm w. AESCULAP drive connection DIN 58809
 34-3400-60 reamer medullary flex. 6,0 mm with HUDSON drive connection
 34-3402-65 reamer medullary flex. 6,5 mm w. AESCULAP drive connection DIN 58809
 34-3400-65 reamer medullary flex. 6,5 mm with HUDSON drive connection
 34-3402-70 reamer medullary flex. 7,0 mm w. AESCULAP drive connection DIN 58809
 34-3400-70 reamer medullary flex. 7,0 mm with HUDSON drive connection
 34-3402-75 reamer medullary flex. 7,5 mm w. AESCULAP drive connection DIN 58809
 34-3400-75 reamer medullary flex. 7,5 mm with HUDSON drive connection
 34-3402-80 reamer medullary flex. 8,0 mm w. AESCULAP drive connection DIN 58809
 34-3400-80 reamer medullary flex. 8,0 mm with HUDSON drive connection
 34-3402-85 reamer medullary flex. 8,5 mm w. AESCULAP drive connection DIN 58809
 34-3400-85 reamer medullary flex. 8,5 mm with HUDSON drive connection
 34-3402-90 reamer medullary flex. 9,0 mm w. AESCULAP drive connection DIN 58809
 34-3400-90 reamer medullary flex. 9,0 mm with HUDSON drive connection
 34-3402-95 reamer medullary flex. 9,5 mm w. AESCULAP drive connection DIN 58809
 34-3400-95 reamer medullary flex. 9,5 mm with HUDSON drive connection
 34-3403-00 reamer medullary flex. 10,0 mm w. AESCULAP drive connection DIN 58809
 34-3401-00 reamer medullary flex. 10,0 mm with HUDSON drive connection
 34-3403-05 reamer medullary flex. 10,5 mm w. AESCULAP drive connection DIN 58809
 34-3401-05 reamer medullary flex. 10,5 mm with HUDSON drive connection
 34-3403-10 reamer medullary flex. 11,0 mm w. AESCULAP drive connection DIN 58809
 34-3401-10 reamer medullary flex. 11,0 mm with HUDSON drive connection
 34-3403-15 reamer medullary flex. 11,5 mm w. AESCULAP drive connection DIN 58809
 34-3401-15 reamer medullary flex. 11,5 mm with HUDSON drive connection
 34-3403-20 reamer medullary flex. 12,0 mm w. AESCULAP drive connection DIN 58809
 34-3401-20 reamer medullary flex. 12,0 mm with HUDSON drive connection
 34-3403-25 reamer medullary flex. 12,5 mm w. AESCULAP drive connection DIN 58809
 34-3401-25 reamer medullary flex. 12,5 mm with HUDSON drive connection
 34-3403-30 reamer medullary flex. 13,0 mm w. AESCULAP drive connection DIN 58809
 34-3401-30 reamer medullary flex. 13,0 mm with HUDSON drive connection
 34-3403-35 reamer medullary flex. 13,5 mm w. AESCULAP drive connection DIN 58809
 34-3401-35 reamer medullary flex. 13,5 mm with HUDSON drive connection
 34-3403-40 reamer medullary flex. 14,0 mm w. AESCULAP drive connection DIN 58809
 34-3401-40 reamer medullary flex. 14,0 mm with HUDSON drive connection
 34-3403-45 reamer medullary flex. 14,5 mm w. AESCULAP drive connection DIN 58809
 34-3401-45 reamer medullary flex. 14,5 mm with HUDSON drive connection
 34-3403-50 reamer medullary flex. 15,0 mm w. AESCULAP drive connection DIN 58809
 34-3401-50 reamer medullary flex. 15,0 mm with HUDSON drive connection
 34-3403-55 reamer medullary flex. 15,5 mm w. AESCULAP drive connection DIN 58809
 34-3401-55 reamer medullary flex. 15,5 mm with HUDSON drive connection
 34-3403-60 reamer medullary flex. 16,0 mm w. AESCULAP drive connection DIN 58809
 34-3401-60 reamer medullary flex. 16,0 mm with HUDSON drive connection
 34-3403-65 reamer medullary flex. 16,5 mm w. AESCULAP drive connection DIN 58809
 34-3401-65 reamer medullary flex. 16,5 mm with HUDSON drive connection
 34-3403-70 reamer medullary flex. 17,0 mm w. AESCULAP drive connection DIN 58809
 34-3401-70 reamer medullary flex. 17,0 mm with HUDSON drive connection
 34-3403-75 reamer medullary flex. 17,5 mm w. AESCULAP drive connection DIN 58809
 34-3401-75 reamer medullary flex. 17,5 mm with HUDSON drive connection
 34-3403-80 reamer medullary flex. 18,0 mm w. AESCULAP drive connection DIN 58809
 34-3401-80 reamer medullary flex. 18,0 mm with HUDSON drive connection


 34-3608-00 bender for intramedull. nails
 34-3614-00 extractor f.flex.medull.nails
 34-3610-00 impact.extract.flex.medul.nail
 34-3605-00 impactor flex.medullary nails
 34-3604-00 inserter flex.medullary nails


 34-3632-00 JEWETT nail impactor extractor
 34-3621-21 LLOYD impactor for femoral nails with threaded head
 34-3630-00 nail starter for three flange nails
 34-3620-20 RITCHEY nail starter 20 cm cannulated cannulation 2,5 mm
 34-3622-16 SVEN JOHANSSON nail driver


 34-3702-00 BLOUNT bone staple extractor
 34-3704-00 BLOUNT bone staple impactor
 34-3706-00 BLOUNT bone staple inserter
 34-3708-00 impactor for staples 36-6002-06 to -14
 34-3710-01 impactor for staples 36-6020-09 to 36-6024-16
 34-3710-02 impactor for staples 36-6030-05 to 36-6032-15
 34-3654-17 PALMER impactor for bone nails
 34-3652-15 PALMER introducer for bone nails


 34-3820-00 bending iron for wire drills
 34-3850-06 blade cross slot large
 34-3850-05 blade cross slot small
 34-3850-02 blade for slotted srew heads
 34-3850-04 key inner hex. 2,5 mm
 34-3850-01 key inner hex. 3,5 mm
 34-3850-03 PHILLIPS blade
 34-3850-10 screw driver quick act.chuck
 34-3810-02 tightener for bone wire double
 34-3810-01 tightener for bone wire single





Ihren XING-Kontakten zeigen